Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chauvet DJ INTIMIDATOR SPOT 60 ILS
Summary of Contents for Chauvet DJ INTIMIDATOR SPOT 60 ILS
- Page 1 User Manual...
- Page 2 Edition Notes The Intimidator Spot 60 ILS User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Intimidator Spot 60 ILS as of the release date of this edition. Trademarks Chauvet, Chauvet DJ, the Chauvet logo, and Intimidator are registered trademarks or trademarks of Chauvet &...
-
Page 3: Table Of Contents
Reset..........................12 Factory Reset......................... 13 System Information ......................13 Calibration Menu ...................... ILS Mode........................D-Fi USB Connectivity ..................... D-Fi USB Compatibility ....................14 D-Fi USB Configuration....................14 D-Fi USB DIP Switch Channels ..................Intimidator Spot 60 ILS User Manual Rev. 1... - Page 4 Color Wheel ........................Gobo Wheel ........................Blackout .......................... Master/Slave Mode ....................Wired Master/Slave Mode....................16 D-Fi USB Master/Slave Mode ..................16 5. Maintenance....................Product Maintenance ....................6. Technical Specifications................Contact Us......................Warranty & Returns....................Intimidator Spot 60 ILS User Manual Rev. 1...
-
Page 5: Before You Begin
Important installation or configuration information. The product may not function correctly if this information is not used. Useful information. Intimidator Spot 60 ILS User Manual Rev. 1... -
Page 6: Safety Notes
♦ Set this product on a flammable surface. Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Intimidator Spot 60 ILS User Manual Rev. 1... -
Page 7: Introduction
D-Fi USB port 3-pin DMX in/out Fuse holder Power in/out 10 11 Product Dimensions 7.8 in (199 mm) 13.8 in (351 mm) 7.6 in 5.8 in (193 mm) (148 mm) 9.9 in (251 mm) Intimidator Spot 60 ILS User Manual Rev. 1... -
Page 8: Setup
3. Setup AC Power The Intimidator Spot 60 ILS has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 9: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Intimidator Spot 60 ILS may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 10: Operation
Navigates downwards through the menu list or decreases a selected numeric value <ENTER> Enables the currently displayed menu or sets a selected value into the selected function Menu Map Refer to the Intimidator Spot 60 ILS product page on www.chauvetdj.com for the latest software and menu map. Main Menu... -
Page 11: Dmx Configuration
Choosing a starting address that is too high could restrict access to some of the product’s channels. The Intimidator Spot 60 ILS uses up to 14 DMX channels in a 14CH DMX mode, which defines the highest configurable address to 499. -
Page 12: Dmx Channel Assignments And Values
232 255 Gobo bounce, short to long 000 015 No function Prism 016 255 3-facet prism Focus 000 255 Focus, large to small – Dimmer 000 255 0–100% Intimidator Spot 60 ILS User Manual Rev. 1... - Page 13 168 183 Sound-active macro 3 184 199 Sound-active macro 4 200 215 Sound-active macro 5 216 231 Sound-active macro 6 232 247 Sound-active macro 7 248 255 Sound-active macro 8 Intimidator Spot 60 ILS User Manual Rev. 1...
-
Page 14: Standalone Configuration
DMX signals from the controller. Run Mode Automatic mode To run the Intimidator Spot 60 ILS in automatic mode, follow the instructions below: 1. Press <MENU> repeatedly until Run Mode is displayed. 2. Press <ENTER>. -
Page 15: Settings Configuration
5. Use <UP> or <DOWN> to set the tilt angle from 90 (90°), 180 (180°), or up to 234 (234°). 6. Press <ENTER>. Totem Mode To restrict the range of pan and tilt motion based on how the Intimidator Spot 60 ILS is mounted, do the following: 1. Press <MENU> repeatedly until Setup is displayed. -
Page 16: Sound Sensitivity
5. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from 000–100. 6. Press <ENTER>. DMX Loss To set the action that the Intimidator Spot 60 ILS will do when the DMX signal is lost, do the following: 1. Press <MENU> repeatedly until Setup is displayed. 2. Press <ENTER>. -
Page 17: Factory Reset
Operation Factory Reset To restore the Intimidator Spot 60 ILS to factory default settings, follow the instructions below: 1. Press <MENU>. 2. Use <UP> or <DOWN> to select Setup. 3. Press <ENTER>. 4. Use <UP> or <DOWN> to select Factory Set. -
Page 18: D-Fi Usb Connectivity
D-Fi USB Connectivity The Intimidator Spot 60 ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D- Fi receiving/transmitting channel, then plug it into the D-Fi USB port. -
Page 19: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The Intimidator Spot 60 ILS is compatible with the IRC-6 infrared remote control from Chauvet. To set the Intimidator Spot 60 ILS to IR mode, follow the instructions below: 1. Press <MENU>. 2. Use <UP> or <DOWN> to select Run Mode. -
Page 20: Master/Slave Mode
D-Fi USB Master/Slave Mode The D-Fi USB allows a single Intimidator Spot 60 ILS product (the “master”) to control the actions of one or more Intimidator Spot 60 ILS products (the “slaves”) without the need of a DMX controller or DMX cables. -
Page 21: Maintenance
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans using compressed air because they could be damaged. Intimidator Spot 60 ILS User Manual Rev. 1... -
Page 22: Technical Specifications
Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 8, 10, or 14 Ordering Product Name Item Code UPC Number Intimidator Spot 60 ILS 10012189 781462225377 Intimidator Spot 60 ILS User Manual Rev. 1... -
Page 23: Contact Us
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Intimidator Spot 60 ILS User Manual Rev. 1...
Need help?
Do you have a question about the INTIMIDATOR SPOT 60 ILS and is the answer not in the manual?
Questions and answers