Omron 3G3JV Manual page 11

Param- Name
eter
No.
n59 Overtorque
detection function
selection
n60 Overtorque
detection level
n61 Overtorque
detection time
n62 UP/DOWN
command frequency
memory
n63 Torque
compensation gain
n64 Motor rated slip
n65 Motor no-load
current
n66 Slip compensation
gain
n67 Slip compensation
time constant
n68 to OMRON's control
n74 reference use
n75 Low-speed carrier
frequency reduction
selection
n76 O OMRON's control O
reference use f
n77
n78 Error log
n79 Software number
Note: Values longer than 3 digits are rounded up to the next unit multiple.
Description
Used to enable or disable overtorque detection and
select the processing method after overtorque
detection.
Used to set overtorque detection level.
Used to set the detection time of overtorque.
Used to store the adjusted frequency reference with the
UP/DOWN function.
Used to set the gain of the torque compensation
function.
Used to set the rated slip value of the motor in use.
Used to set the no-load current of the motor in use
based on the rated motor current as 100%.
Used to set the gain of the slip compensation function.
Used for the response speed of the slip compensation
function.
Do not change the set value.
Used to select a function to reduce the carrier
frequency when Inverter is at low speed.
Do not change the set value. g
Used to display the latest error recorded.
Display
Note "– – –" will be displayed if no error has been re-
corded.
Note This parameter is monitored only.
Used to display the software number of the Inverter for
OMRON's control reference use.
Note This parameter is monitored only.
List of Parameters
Setting Unit of Default
range setting setting
(see note)
0 to 4 1 0
30 to 200 1% 160
0.1 to 10.0 0.1 s 0.1
0, 1 1 0
0.0 to 2.5 0.1 1.0
0.0 to 20.0 0.1 Hz Varies
with the
capacity.
0 to 99 1% Varies
with the
capacity.
0.0 to 2.5 0.1 0.0
0.0 to 25.5 0.1 s 2.0
--- --- ---
0.1 1 0
--- --- ---
--- --- ---
--- --- ---
Changes Reference
during op- page
eration
No 19
No 19
No 19
No 20
Yes 21
Yes 21
No 21
Yes 21
No 21
--- ---
No ---
--- ---
--- ---
--- ---
13