Ouellet Zephyr OFY10000 Manual
Ouellet Zephyr OFY10000 Manual

Ouellet Zephyr OFY10000 Manual

Electric furnace

Advertisement

• Never tamper with the unit or its controls. User MUST contact
a specialized contractor when a failure occurs. DO NOT
ATTEMPT to repair.
• When using a humidifier make sure not to damage the heating
element bank.
• We recommend that your unit be inspected by a specialized
technician once a year.
• Poor maintenance of air filters OR an unbalanced static
pressure may result in a performance decrease.
• Always use genuine parts for maintenance or service call.
The use of unbranded parts will void the warranty.
• The use of this unit without an air distribution duct will void
the warranty.
• It is strictly forbidden to use jumpers to simulate heat demand.
• Risk of electrical shock. Disconnect power before installation,
servicing, maintenance or field wiring. Replace all panels
before operating. Failure to do so can result in electrical
shock causing severe injuries or death.
• When performing installation, servicing or cleaning the unit,
it is recommended to wear safety glasses and gloves.
• To assure a proper performance of your furnace, we recommend
that you use high quality name brand thermostats.
• When applicable local regulation comprises more restrictive
installation and/or certification requirements, the aforementioned
requirements prevail on those of this document and the
installer agrees to conform to these at his own expenses.
• For your safety, do not store or use gasoline or other flammable
liquids and vapors in the vicinity of this unit or any other
appliance.
• These instructions are intended to be use by qualified personnel
who have been trained in installing this type of furnace.
Installation of this furnace by an unqualified person may
lead to equipment damage and/or hazardous condition
which may lead to bodily harm.
• Never burn garbage or paper in the heating system and never leave rags or paper around the unit.
• Return air grilles and warm air registers must not be obstructed.
IMPORTANT: All local and national code requirements governing the electrical installation heating equipment, wiring and flue connections
must be followed. Some of the codes that may be applicable are:
ANSI/NFPA 70 NATIONAL ELECTRICAL CODE
CSA C22.1 CANADIAN ELECTRICAL CODE
Only the latest issues of the above codes should be used, and are available from either:
The National Fire Protection Agency
Batterymarch Park
Qunicy, MA 02269
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS.
ELECTRIC FURNACE
WARNING
!
• This furnace is not watertight and is not designed for outdoor
installation. This furnace shall be installed in such a manner
as to protect its electrical components from water. Outdoor
installation leads to a hazardous electrical condition and to
premature furnace failure, thus voiding the warranty.
• Do not block the combustion air openings in the furnace.
Any blockage will result in improper overheat situation and
may result in a fire hazard and/or cause bodily harm.
• The unit must have an uninterrupted or unbroken electrical
ground to minimize personal injury if an electrical fault
should occur. When performing electrical connection, the
ground conductor must be firmly attached to the ground lug
in the furnace.
• Do not use this furnace as a construction heater. Use of this
furnace as a construction heater exposes the furnace to
abnormal conditions, contaminated combustion air and the
lack of air filters. Failure to follow this warning can lead to
premature furnace failure and/or vent failure which could
result in a fire hazard and/or bodily harm.
• The owner and/or the user is responsible of the following:
Always maintain the immediate surrounding of the furnace
free from combustible and highly flammables materials.The
furnace ambient air should not have an excessive dust
concentration and humidity. Never operate this central heating
appliance without an air filter.
• Before performing any service functions, unless operations
specifically require the power to be on, make sure all utilities
are turned "OFF" upstream of the appliance. Failure to comply
with this warning will cause a fire hazard and/or bodily harm.
• All questions regarding the operation, maintenance or warranty
of this unit should be addressed to the company where this
product has been sold from.
CAUTION
or
e
180, 3
Avenue, L'Islet (Québec) G0R 2C0 CANADA
Tel.: 418-247-3947 • Fax: 418-247-7801
www.ouellet.com
The Canadian Standards Association
178 Rexdale Blvd.
Rexdale, Ontario M9W 1R3
30042406B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zephyr OFY10000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ouellet Zephyr OFY10000

  • Page 1 The National Fire Protection Agency The Canadian Standards Association Batterymarch Park 178 Rexdale Blvd. Qunicy, MA 02269 Rexdale, Ontario M9W 1R3 IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. 180, 3 Avenue, L'Islet (Québec) G0R 2C0 CANADA Tel.: 418-247-3947 • Fax: 418-247-7801 www.ouellet.com 30042406B...
  • Page 2: General Requirements And Specifications

    INSTALLATION AND OPERATING INSTRUCTIONS This furnace has been designed and manufactured to give the The safe and dependable operation of the furnace depends upon most reliable performance possible. Each unit has been given a proper installation and compliance with all national and local running inspection before shipment to assure that every component codes and standards.
  • Page 3 GENERAL REQUIREMENTS AND SPECIFICATIONS (CONT’D) 240 VOLTS – SINGLE PHASE TEMP. RISE @ 0.20 IN. W.C. MODEL NO. BTUH AMPS INCL. MOTOR BLOWER °C °F *SPEED OFY10000 34120 OFY15000 51180 MED-LOW 10” x 8” OFY18000** 61420 MED-LOW (254 mm x 203 mm) OFY20000** 68240 MED-LOW...
  • Page 4: Operating Options

    OPERATING OPTIONS The furnace is shipped from the factory in a “Standard Heating The timing of this blower speed change will depend on the size of Mode” (all switches are in the Down position). When the thermostat the furnace (10 kW model does not change speeds), and whether calls for heat, the automatic controls will be activated and the furnace “Cold”...
  • Page 5: Using Optional Equipment

    FOR USE IN MOBILE HOMES SHALLOW DUCT AREA REQUIREMENTS Zephyr furnaces 10, 15, 18 and 20 kW models are certified for “L” -shape and “T”-shape shallow duct installation with model Duct Depth Duct Width OFYOR-SO sub-base in downflow applications when the supply 4”...
  • Page 6: Service Parts

    SERVICE PARTS REPLACEMENT PARTS TIME DELAY RELAYS (SEQUENCERS) KEY NO. PART NO. BOTTOM SECOND THIRD 30270025 15 kW 27 kW 30270026 10 kW 18-20-25-27 kW 10940925 15-18-20 kW 10940926 25-27 kW KEY NO. PART NO. DESCRIPTION 10940927 24 V Fan Relay 10940928 240 V Fan Relay (not in OFY10000) 30270032...
  • Page 7 WIRINGS DIAGRAMS WARNING Risk of electrical shock. Disconnect power before installation, servicing, maintenance or field wiring. Replace all panels before operating. Failure to do so can result in electrical shock causing severe injuries or death.
  • Page 8: Troubleshooting

    The obligation of Ouellet Canada Inc., under the terms of this warranty, shall be to supply a new part, or the repair of a defective part at the company’s option with no cost to owner for the new or repaired part.

This manual is also suitable for:

Zephyr ofy15000Zephyr ofy18000Zephyr ofy20000Zephyr ofy25000Zephyr ofy27000

Table of Contents