Advertisement
Cleaning the click-on attachments
How do I use the Quick Clean Pod?
Preparing the Quick Clean Pod for use
Never dry the trimmer or beard styler attachments with a
towel or tissue, as this may damage the trimming teeth.
The accessories supplied may vary for different products.
The box shows the accessories that have been supplied
with your product.
Clean the click-on attachments after each use for optimal
performance.
1 Make sure that the appliance is switched off.
2 Twist the attachment to remove it from the handle.
Pull the cleansing brush head straight off of the
attachment holder.
3 Clean the parts thoroughly with warm water. Use
soap only on the cleansing brush attachment.
Tip: If rinsing the nose/ear trimmer attachment under
the tap is not sufficient, press the attachment onto
handle and immerse the trimming head in a glass
with warm water for a few minutes. Then switch on
the appliance and rinse it under the tap.
4 Carefully shake off excess water from the beard styler,
combs and nose/ear trimmer attachments and let
them air dry completely.
Dry the cleansing brush attachment with a towel.
Never dry the cutting unit with a towel or tissue, as
this may damage the trimming teeth.
Tip: For optimal performance, lubricate the teeth of
the beard styler attachment with a drop of sewing
machine oil regularly.
1 Twist and remove the top of the Quick Clean Pod.
21
English
Advertisement
