Related Manuals for ClearOne DIALOG UVHF
Summary of Contents for ClearOne DIALOG UVHF
- Page 1 Quick Start Guide DIALOG® UVHF Microphone Transmitters and Charger Dock Access Point Dante Interface QSG-0097-001v1.0 March 2024...
-
Page 2: Clearone ® Contacts
Salt Lake City, UT 84116 Sales Technical Support Tel: +1.801.975.7200 Tel: +1.801.974.3760 sales@clearone.com audiotechsupport@clearone.com Notices © 2024 ClearOne, Inc. All rights reserved. Information in this document is subject to change without notice. Document: QSG-0097-001v1.0 March 2024 Page 1 QSG-0097-001v1.0 March 2024... -
Page 3: Packing List
Verify that you have received all parts associated with each of the components. Inspect your shipment carefully. If the shipment shows obvious signs of damage, retain original boxes and packing material for inspection by the carrier, and contact them immediately. ClearOne is not responsible for product damage incurred during shipment. -
Page 4: Circuit Diagram
DIALOG UVHF Quick Start Guide Circuit Diagram Personal Computer Access Point PoE Injector Ethernet Ethernet Ethernet Switch Dante Interface PoE Injector Ethernet Docking Station PoE Injector Ethernet Page 3 QSG-0097-001v1.0 March 2024... -
Page 5: Status Indicators
DIALOG UVHF Quick Start Guide Status Indicators Access Point (AP) LEDs LED Color Meaning (AP) • Red = Not connected to the Network • Blue = Connected to the Network • Green = AP has found the dock associated • RGB = Firmware update in progress... - Page 6 DIALOG UVHF Quick Start Guide Boundary LED Color Meaning In Use (Boundary) LED Color Meaning in dock (Boundary) • Red = Connected to AP with audio muted • Red = Charging • Green = Connected to AP with audio not muted •...
- Page 7 DIALOG UVHF Quick Start Guide Handheld LED Color Meaning In Use (Handheld) LED Color Meaning in dock (Handheld) • Red = Connected to AP with audio muted • Red = Charging • Green = Connected to AP with audio not muted •...
- Page 8 DIALOG UVHF Quick Start Guide Dante Interface LED Color Meaning (Dante Interface) • Red = Not connected to the Network • Blue = Connected to the Network • Green = Dante Interface has found the AP associated • RGB = Firmware update in progress Page 7 QSG-0097-001v1.0 March 2024...
-
Page 9: Safety Precautions
To Sync the transmitters to the access point 1. Connect to the Dialog UVHF Software, click on the View System Page and Assign the Dante Interface(s) and Charger Dock(s).
Need help?
Do you have a question about the DIALOG UVHF and is the answer not in the manual?
Questions and answers