Connecting The Monitor For Dpbs For The First Time - Dell P Series User Manual

Connecting the monitor for DPBS for the first time

For the first time setting up the DPBS function:
1. Make sure both the PC and the monitor are OFF.
2. Press the monitor power button to turn ON the monitor.
3. Connect the USB-C cable (shipped with your monitor) from the PC to the
monitor.
4. Both the monitor and PC will turn ON normally. If not, press the power button
either on the monitor or the PC to boot up the system.
NOTE: Ensure that Dell Power Button Sync is set to On. See
Button Sync.
│
58 Setting up the monitor
Dell Power