Sloan BPW-1100 Installation Instructions Manual

INSTALLATION INSTRUCTIONS FOR OPTIMA
SLIMLINE BEDPAN WASHER WITH EXPOSED ROYAL
Sloanl BPW-1100
Sloan Valve Company warrants its ES-S Sensor Activated Sloan
service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three years (1 year for special finishes) from date of purchase. During this period,
Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer's cost, and this shall be the sole remedy available under
this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company's products directly from Sloan
Valve Company for purpose of resale.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
VALVE ROUGH-IN
BPW-1000 ESS
1-1/2"
2-1/4" MIN. 2-3/4"
(38 mm)
(57mm) (70 mm)
34-3/8"
OVERRIDE
(873 mm)
BUTTON
17"
(425 mm)
9-1/2"
(241 mm)
TOP OF CENTER LINE
FIXTURE OF WASTE
FIN.
FLOOR
FIN.
WALL
BPW-1155 ESS
1-1/2"
3-3/4" MIN. 2-3/4"
(38 mm)
(95 mm)
(70 mm)
OVERRIDE
BUTTON
GRAB BAR
(NOT SUPPLIED
26-1/2"
BY SLOAN)
(673 mm)
1-1/2"
(38 mm) 17" †
(425 mm)
9-1/2"
(241 mm)
TOP OF CENTER LINE
FIXTURE
OF WASTE
FIN.
FLOOR
FIN.
WALL
Royal BPW-1150
Regal BPW-1155
and Regal Bedpan Washer to be made of first class materials, free from defects of material or workmanship under normal use and to perform the
® ®
BPW-1100 ESS
4-3/4"
(121 mm)
2-1/4" MIN.
1" I.P .S.
(57 mm)
SUPPLY
(DN 25 mm)
13-3/4"
(349 mm)
26-1/2"
(673 mm)
9-1/2"
(241 mm)
TOP OF
CENTER LINE
FIXTURE
OF WASTE
FIN.
WALL
FLUSH VOLUME
4-3/4"
(121 mm) BPW VALVE CAN BE PROVIDED WITH THE FOLLOWING FLUSHING
VOLUMES:
1" I.P .S.
SUPPLY
• Standard — Water Saver, 3.5 gpf (13.2 Lpf)
(DN 25 mm)
• "-1.6" — Low Consumption, 1.6 gpf (6.0 Lpf)
10-3/16"
(259 mm)
• "-2.4" — 2.4 gpf (9.0 Lpf)
• "-1.28" — High Efficiency 1.28 gpf (4.8 Lpf)
‡ POSITION OF SENSOR BOX CAN BE RAISED OR LOWERED
1" (25 mm) IF IN CONFLICT WITH HANDICAP GRAB BARS.
SYSTEMS SENSOR ACTIVATED
®
SLOAN
®
Royal BPW-1100
LIMITED WARRANTY
1-1/2"
2-3/4" 4-3/4"
(38 mm)
(70 mm) (121 mm)
1" I.P .S.
SUPPLY
(DN 25 mm)
13-3/4"
OVERRIDE
(349 mm)
BUTTON
17"
(425 mm)
FIN.
FLOOR
Code No. 0816730 Rev. 1
AND REGAL FLUSHOMETER
® ®
Slimline Bedpan Washers
®
BPW-1000 Standard
Slimline Bedpan Washers for ADA Installations
®
BPW-1100 Standard
BPW-1150 With Grab Bar Offset
BPW-1155 With Grab Bar Offset & Deoseptic Unit
Slimline Bedpan Washers — Diverter Assemblies
®
DV-100 Standard
DV-105 With Deoseptic Unit
DV-110 For ADA Installation
DV-115 For ADA Installation With Deoseptic Unit
DV-120 With Grab Bar Offset
DV-125 With Grab Bar Offset & Deoseptic Unit
DV-130 Replacement Model
DV-135 Replacement Model With Deoseptic Unit
BPW-1150 ESS
1-1/2"
3-3/4" MIN.
2-3/4"
(38 mm)
(95 mm) (70 mm)
OVERRIDE
BUTTON
GRAB BAR
(NOT SUPPLIED
26-1/2"
BY SLOAN)
(673 mm)
1-1/2"
17" †
(38 mm)
(425 mm)
9-1/2"
(241 mm)
TOP OF
CENTER LINE
FIXTURE OF WASTE
FIN.
FLOOR
FIN.
WALL
SENSOR LOCATION & POSITIONING IS
CRITICAL!
Failure to properly position the electrical boxes to the
plumbing rough-in will result in improper installation
and impair product performance. All tradesmen
(plumbers, electricians, tile setters, etc.) involved with
the installation of this product must coordinate their
work to assure proper product installation.
(08/20)
4-3/4"
(121 mm)
1" I.P .S.
SUPPLY
(DN 25 mm)
10-3/16"
(259 mm)