Testing; Characteristics; Programming - THOMSON ROC2309 Operating Instructions Manual

ROC2309
00131872
1
3
4
5
7
9
10
9
13
15
17
AAA
00131872bda.indd 4-Abs1:1 00131872bda.indd 4-Abs1:1
Operating Instructions .......................................................... 01
Mode d'emploi ....................................................................... 04
Bedienungsanleitung ............................................................. 07
Istruzioni per l'uso ................................................................. 10
Instrucciones de uso ............................................................. 13
2
Gebruiksaanwijzing ............................................................... 16
Manual de instruções ............................................................ 19
..................................................................... 22
Instrukcja obsługi ................................................................... 28
Návod k použití ...................................................................... 31
Használati útmutató .............................................................. 34
Bruksanvisning ....................................................................... 37
Brukerveiledning .................................................................... 40
Brugsanvisning ....................................................................... 43
Pistokelaturi ............................................................................ 46
6
8
8
11
12
14
16
Characteristics - Caractéristiques - Eigenschaften - Caratteristiche
Características - Eigenschappen - Características -
Karakterisztika - Data - Karakteristikker - Data - Ominaisuudet
Weight = 80 grammes
Poids = 80 grammes
Gewicht = 80 Gramm
Peso = 80 grammi
Peso = 80 gramos
Gewicht = 80 gram
Peso = 80 gramas
Dimensions - Dimensions - Abmessungen - Dimensioni - Dimensiones
- Afmetingen - Dimensões -
- Méret - Mått - Dimensjoner - Mål - Mitat
......................................... 25
- Dane techniczne - Technické údaje
Ciężar = 80 g
Hmotnost = 80 g
Súly = 80 gramm
Vikt = 80 gram
Vekt = 80 gram
Vægt = 80 gram
Paino = 80 grammaa
- Wymiary - Rozměry
= 171 x 49 x 20 mm
This universal remote control (2 in 1) is compatible with the majority of television sets, DVD
players and video recorders, amplifi ers and Hi-Fi and Home Cinema systems, as well as
digital boxes such as satellite or cable receivers, DVBT receivers (Digital Video Broadcast
Terrestrial), ADSL decoders, and so on.
This remote control was programmed in the factory, so that you can use it to control most
of the sets of the THOMSON group's make. For this reason, we recommend that prior to
attempting to programme the remote control, you try it out by means of one of the methods
described in this user manual. However, fi rst of all, you must install 2 batteries (AAA) in the
remote control.
Please keep this guide along with the code list (provided separately), so that you can
subsequently programme your remote control for use with other sets.
corresponds to the type of device, for example: 0603
The keys
for a Thomson satellite receiver) and then to run the
automatic search procedure. The remote control will
1 Indicator light: The red indicator light is lit
then test all the codes automatically until it fi nds those
whenever a key is pressed.
that control the receiver.
2 G : On/Standby or Standby only, depending on
Note 2: To control 2 devices of the same type and the
the equipment being used.
same brand (2 Thomson VCRs, 2 Thomson satellite
3 Mode keys: Select the device to control (TV, DVD,
receivers, ...) ensure fi rst that these two devices are not
...).
set to react to the same sub code, they will require one
4. B (play): Play a DVD disc or a VCR tape*.
sub code for one and a different sub code for the other
F (FF): Fast forward (DVD, VCR,...)*.
(i.e., codes A and B with Thomson devices). Once you
E (RW): Goes backward (DVD, VCR,...)*.
have checked this, successively program 2 separate
J (pause): Suspends play and stops on an
mode keys using method D.
image*.
I (record): To record, press the RECORD key
twice.

Programming

K (stop): Stop the disc (DVD)*.
the remote control
5. : Teletext On.
: Teletext Off.
Method A – Fast programming
: Teletext Hold (stop page scrolling).
with 1-digit subcode
: Displays information of the selected
appliance.
Before you start programming, you must fi nd the
6 Guide: Electronic Program Guide.
subcode of the set to be controlled. Entering a subcode
7 Setup: Allows you to program your remote
lets the remote control test a predefi ned list of codes.
before the fi rst use.
Refer to the list provided with these instructions, page I
8 P+/P-: Channel Up and Channel Down buttons.
of the subcodes.
9. V+/V-: Increases (+) or decreases (-) the volume
1. Switch on the set you want to control.
of the selected device.
2. Hold down the SETUP key until the red indicator
10. OK: Confi rms a selection.
light blinks and then remains lit (the indicator light
11. C/D/A/B: Allow you to navigate the menus
remains on for a few seconds to give you the time to
verticaly and horizontaly.
proceed with the following steps. The indicator lamp
12. Exit: Turn off the menu of the selected product.
fl ashes to signal that this time is almost up, and then
13. H (Mute): Switches the selected appliance sound
goes off). Release the SETUP key.
off.
3. Press the key that corresponds to the type of
14. Menu: Turns on the menu of the selected product.
equipment you want to control:
15. Numeric keys 0-9: These keys have the same
TV: television set, DVD: DVD player, Video
functions as those of your original remote and
recorder, SAT: satellite receiver, cable, DVBT, ADSL
are also used to enter the code.
4. While the indicator is lit, type in the subcode
16. :--/-: In connection with the numeric keys, this
(example: 1 for THOMSON).
button allows you, with some equipment, to select
5. Direct the remote control towards the set and try to
directly channels with 2 digits.
switch it off by pressing the key G.
17. AV: For selecting an external source (SCART,
6. If the set you want to control switches off, press OK
HDMI, ...)..
to memorise the code.
Note: depending on the actual devices, manufacturers
7. Should the set not switch off, press key G repeatedly,
and year of manufacture, the functions available
until the set switches off. Between pressing the keys,
will vary.
be sure to leave enough time for the indicator light to
* The coloured buttons can be used to select categories
go out and then relight (about 1 second). Proceeding
when teletext is activated, and specifi c functions
this way will enable you to see whether the set
depending on the make.
responds or not.
8. Immediately upon the switching-off of the set to be
Testing the remote control before
controlled, press OK to store the code.
you programme it
Check of the programming:
1. Switch on the set you want to control. In principle, your set is ready for receiving the remote
2. Press the key that corresponds to the type of
control commands.
equipment you want to control: Check your remote control for proper functioning by
TV: Television Set,
performing the test described on page 2.
DVD: DVD Player, Video Recorder,
SAT: Satellite Receiver, Cable Receiver, ADSL Box,
Method B – 4-digit codes
DVBT Receiver, ...
programming
3. Direct the remote control towards the TV set and
try to switch it off by simply pressing the key G. If
Before you start programming, you must fi nd the code
the device does not turn off, you must program the
of the set to be controlled.
remote control using one of the methods A, B, C or
Refer to the list provided with these instructions, page
D described hereafter.
II of the codes.
1. Switch on the set you want to control.
Note 1: Except for the TV key, the DVD, SAT mode
2. Hold down the SETUP key until the red indicator
keys can be programmed to control a device other
light blinks and then remains lit (the indicator light
than that indicated on the key. It is therefore possible,
remains on for a few seconds to give you the time to
for example, to allocate SAT mode to the DVD key. You
proceed with the following steps. The indicator lamp
must enter the code corresponding to the manufacturer
fl ashes to signal that this time is almost up, and then
and the device by using one of the methods indicated
goes off). Release the SETUP key.
in this manual.
3. Press the key that corresponds to the type of
However, method D (automatic search for a code)
equipment you want to control:
will greatly simplify the task for you. In this case it
TV: television set, DVD: DVD player, Video
is only necessary to enter a code from the list that
1
05.10.2009 9:33:23 Uhr 05.10.2009 9:33:23 Uhr