iLive ITBSW399 - Bluetooth Sound Bar Manual
![]()
Setup
Features & Specifications
- 37" length
- Supports Bluetooth 5.0, range: 60 ft.
- 2.1 channel stereo sound
- Digital volume control
- Full-function remote
- Optical audio input
- Line In (3.5mm audio input)
- Aux In RCA stereo audio inputs
Includes
- Remote control with 2 AAA batteries
- Optical audio cable
- AC/DC power adapter for sound bar and subwoofer
- Wall-mount hardware and instructions
Power
Plug the power adapters for the sound bar and the subwoofer into their respective DC Inputs on the back of the units and a standard wall outlet.
![iLive - ITBSW399 - Power Power]()
Remote Battery
Remote control: requires 2 AAA batteries (included).
![iLive - ITBSW399 - Remote Battery Remote Battery]()
Orientation
Rear View
![iLive - ITBSW399 - Rear View Rear View]()
Front View
![iLive - ITBSW399 - Front View Front View]()
Source Mode Indicator LED
STATUS | INDICATOR LIGHT |
Power Off | Red Light |
Bluetooth Standby/Pairing | Slow/Quick Flashing Blue Light |
Bluetooth Connected | Solid Blue Light |
Optical Mode | Orange Light |
Aux In (RCA) Mode | White Light |
Line In Mode | Green Light |
Speaker Controls (Side)
![iLive - ITBSW399 - Speaker Controls (Side) Speaker Controls (Side)]()
Power/Source
Press to power the unit ON.
Press and hold to power the unit OFF.
Press to switch audio source to Bluetooth, Optical, Aux In, or Line In modes.
Volume
Press to adjust volume.
Pair/Play/Pause
Press and hold to begin pairing to a Bluetooth device. Press to play or pause audio (BLUETOOTH MODE).
Line In (3.5mm audio input)
Connect the sound bar to a mobile device using a 3.5mm audio cable (not included).
Subwoofer
Connecting the Wireless Subwoofer
![iLive - ITBSW399 - Connecting the Wireless Subwoofer Connecting the Wireless Subwoofer]()
- Power ON the subwoofer while the sound bar is ON. The subwoofer will now automatically begin connecting to the sound bar.
- When the subwoofer has connected to the sound bar the Connect LED indicator will turn solid blue. When audio is played through any source, the speaker will automatically use the connected subwoofer.
- If the connection has failed or is lost, the indicator will turn off. Power OFF the subwoofer and power it ON again to try reconnecting.
NOTE: To reduce unwanted vibration, try placing the subwoofer on a solid or padded surface, such as the floor or carpet.
Remote
Functions & Controls
![iLive - ITBSW399 - Remote - Functions & Controls Remote - Functions & Controls]()
Connecting Devices
Initial Bluetooth Connection and Playing Audio
- Power ON the sound bar by pressing the Power button. A voice will say, "Bluetooth," and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
- Using the controls on your Bluetooth device, select ITBSW399 in the Bluetooth Settings to pair. If need be, refer to the user's manual for your specific device for more information.
- When successfully paired, a voice will announce, "Bluetooth is connected," and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker.
- Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
- After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device used.
Note: If your device should become unpaired or you find it is unable to connect, press & hold the Play/ Pause (remote), or Pair button (sound bar) to enter to Pairing Mode. A voice will announce, "Bluetooth is connecting," and you can connect to the speaker manually.
Note: This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF after it is turned ON again.
Previously Connected Devices
- The sound bar can remember multiple Bluetooth devices and will always try to reconnect to the last device used.
- To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select ITBSW399.
Troubleshooting
If the sound bar should become unpaired or will not connect normally, follow these steps in your device's Bluetooth Settings Menu.
- Delete the sound bar ("Forget This Device").
- Turn Bluetooth OFF, then ON again, and repeat the Initial Bluetooth Connection steps.
Line In
Requires a 3.5mm audio cable (not included).
![]()
Connect 3.5mm audio cable
(not included) to audio source
- Connect a 3.5mm audio cable to the Line In on the unit and the audio output/headphone jack on an audio device.
- Power ON the sound bar and press Source on the sound bar or Line In on the remote to select Line In Mode. A voice will announce the source mode and the indicator will turn green.
- Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing.
Requires RCA stereo audio cable (not included). When connecting RCA stereo audio plugs (Red/White), match them to their corresponding color coded ports.
![iLive - ITBSW399 - Stereo RCA Inputs (Aux In) Stereo RCA Inputs (Aux In)]()
- Connect an RCA stereo audio cable to the Aux In ports on the sound bar and the RCA audio outputs on a television or other audio source.
- Power ON the sound bar and press Source on the sound bar or Aux In on the remote to select Aux In Mode. A voice will announce the source mode and the indicator will turn white for Aux In.
- Audio played through the television or other source should now be heard through the speakers.
Requires an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included).
![iLive - ITBSW399 - Optical Input Optical Input]()
- Using a Digital Optical Audio Cable, connect the Optical Input on the sound bar to the Optical Output on your audio source (TV, amplifier, etc.).
- Power ON the sound bar and press Optical on the remote or Source on the sound bar to select Optical Mode. A voice will announce the source mode and the indicator will turn orange.
- On the connected audio source (TV, amplifier, etc.), be sure the audio settings are set to PCM or Optical Audio.
- Audio played through the connected audio source (TV, amplifier, etc.) should now be heard through the speaker.
Important tips for optical audio:
- Use the correct optical audio cable and make sure that it is firmly seated in both source and sound bar sockets.
- Optical audio output is activated from the audio source (a red light should be visible from the optical socket). It may be labeled SPDIF in the settings menu of the source.
- The optical output source should be set to output PCM and not Dolby Digital.
Website: www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Safety Instructions & Warnings
![]()
![]()
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
![]()
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
![]()
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.
![]()
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Important Safety Instructions
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
![]()
Additional Warnings and Precautions
![]()
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. - Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.
![]()
Shock hazard - Do Not Open. - Caution and marking information is located at the rear or bottom of the apparatus.
![]()
To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. - Objects filled with liquids, such as vases, shall not be placed on the apparatus.
![]()
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. ![]()
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ![]()
Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. ![]()
Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. ![]()
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. - Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- Do not mix old and new batteries.
- Completely replace all old batteries with new ones.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
- Batteries should be recycled or disposed of as per state and local guidelines.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download iLive ITBSW399 - Bluetooth Sound Bar Manual
Need help?
Do you have a question about the ITBSW399 and is the answer not in the manual?
Questions and answers