So as not to scratch the finish on
▶
the appliance, do not use sponges
with a rough surface or abrasive
cleaning agents.
To prevent corrosion, do not use
▶
sponge cloths on dishwashers with
a stainless steel front or rinse such
cloths thoroughly several times be-
fore using them for the first time.
Environmental protection and saving energy
3 Environmental protec-
tion and saving energy
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
3.2 Saving energy
If you follow these instructions, your
appliance will use less electricity and
less water.
Use the Eco 50° programme.
a The Eco 50° programme is en-
ergy-efficient and environmentally
friendly.
→ "Programmes", Page 19
If you do not have much tableware to
wash, use the additional Half Load
1
function.
a The programme will adjust to a
lower load and consumption will
be reduced.
→ "Additional functions", Page 22
1
Depending on the appliance specifications
Environmental protection and saving energy en
3.3 autoOpen Dry
The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows
"0h:00m".
If automatic door opening is deactiv-
ated, energy consumption increases
and the drying phase is usually
shortened.
→ "Overview of the basic settings",
Page 36
If this additional function has been
selected, automatic door opening is
deactivated.
→ "Additional functions", Page 22
Installation and connection
4 Installation and con-
nection
To ensure proper operation, connect
Installation and connection
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
4.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
11