Setting Up The Camera; Removing The Eyecup - Sony Alpha SLT-A37 Handbook

Setting up the camera

Removing the eyecup

When attaching the FDA-A1AM Angle Finder (sold separately) to the
camera, remove the eyecup.
Carefully slide the eyecup off by
pushing on each side of the eyecup.
• Put your fingers under the eyecup, and
slide it upward.
Note
• When an FDA-A1AM Angle Finder (sold separately) is attached to the camera,
switch the display between the viewfinder and the LCD screen by pressing the
FINDER/LCD button. Setting [Eye-Start AF] to [Off] is recommended because the
eyepiece sensors located above the viewfinder may be activated.
77