Ethan Allen Caspius 092015 BLK Assembly Instructions

Caspius Floor Lamp Assembly Instructions
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider
than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb
wattage. Use only the type of bulb specified. Keep flammable materials away from the bulb. DO NOT OPEN the
product or alter the wiring in any manner. If using an extension cord, follow precautions provided with the power
cord.
Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of packaging materials.
Remove the silica gel packet from the socket before plugging the lamp into an outlet.
ASSEMBLY, CARE, AND TROUBLESHOOTING
• No tools required for assembly.
• Light bulb is not included.
Parts Included: (Refer to Figure)
A. Finial
B. Shade
C. Harp
D. Socket
E. Saddle
Assembly Procedure: (Refer to the Figure)
1. Install Harp (C) onto Saddle (E).
2. Install Shade (B) onto Harp (B).
3. Install Finial (A) onto Harp (C).
4. Install Bulb (15W LED max, standard- or medium-based bulb) into
Lamp Socket (D).
5. Remove Plug Cap from Plug.
Caring for and cleaning your lamp:
1. To clean, wipe with a soft, dry cloth.
2. Avoid cleaners, scouring pads, etc., as these may cause
damage to the lamp finish.
3. Before changing bulb, unplug the lamp and allow the
bulb to cool first.
Troubleshooting:
Problem:
Bulb does not light
©2024 Ethan Allen Global, Inc.
092015 BLK / 092015 NKL
Possible cause:
Bulb is burnt or damaged
Power to lamp is off
Lamp is not plugged in
Correction:
Replace bulb
Confirm power is on
Confirm lamp is plugged in
Page 1 of 2