Table of Contents
Advertisement
2. Preliminary Activities
PVC
Core probe protection
- Carefully remove all the protective
film from the external walls of the
appliance. Pay attention not to leave
any residue of glue. If there should
be any residue of glue please
remove it with an appropriate
solvent.
- Remove the probe protection.
- You will find the feet inside the
Feet
appliance. They must be fitted to
the oven. Never use the appliance
without its feet, since they're made
to grant a proper fresh air flow that
cools down the electronic circuits
and the walls of the unit.
- The others 2 positions will be used
for the stacking kit.
9
Advertisement
Table of Contents
