USB support, along with the CT210A and the relevant IQS7211E software Graphical User Interface (GUI) available to download from the Azoteq website. The purpose of the IQS7211EEV02A EV-Kit is to help application and development engineers in evaluating these IC’s capabilities.
➢ Plug the stamp board into the CT210A using the ribbon cable ➢ Connect the CT210A to the PC with a USB cable (use USB data cable only) ➢ Run the IQS7211E GUI (latest version available from the www.azoteq.com website) ➢ Click “Start Streaming” button ➢...
➢ Plug the Headphone Trackpad into the CT210A using ribbon cable ➢ Connect the CT210A to the PC with a USB cable (use USB data cable only) ➢ Run the IQS7211E GUI (latest version available from the www.azoteq.com website) ➢ Click “Start Streaming” button ➢...
➢ Plug the Flower Trackpad into the CT210A using ribbon cable ➢ Connect the CT210A to the PC with a USB cable (use USB data cable only) ➢ Run the IQS7211E GUI (latest version available from the www.azoteq.com website) ➢ Click “Start Streaming” button ➢...
Page 10
Azoteq assumes no liability for any damages or injury arising from any use of the information or the product or caused by, without limitation, failure of performance, error, omission, interruption, defect, delay in operation or transmission, even if Azoteq has been advised of the possibility of such damages.
Need help?
Do you have a question about the IQ Switch ProxFusion Series and is the answer not in the manual?
Questions and answers