Clock Display/Setting Key; Value Increase/Decrease Key; Replacing The Remote Control Batteries - Smeg SDP20 Manual

Remote control

9.6 Clock display/setting key

This key is used for displaying and setting the time.
When the key is held down for a few seconds, the symbol lights up on the control panel and the
orange time display flashes. Use the and keys to set the hour. Now press the key to set the
minutes on the blue display, with the and keys.
Once the time is set, press the key again: the display will stop flashing and after a few seconds will
show the external temperature (right) and humidity (left) and the Home Garden will start automatic
internal climate regulation as set in the selected program.
During normal operation and when the Home Garden is not locked, press the key once to display the
time.
For the preset programs, see "10.2 Automatic regulation of the internal micro-climate" and "10.3
Selecting the programme".

9.7 Value increase/decrease key

These keys are used for setting the time as described in paragraph "9.6 Clock display/setting key" and
selecting the Home Garden's preset operating programs.
For the preset programme, see "10.2 Automatic regulation of the internal micro-climate" and "10.3
Selecting the programme".

9.8 Replacing the remote control batteries

Once they are exhausted, the provided batteries can be replaced with a pair of normal AAA batteries.
Exhausted batteries should be disposed of in a specific waste disposal container.
40