Download  Print this page

Installation - Philips DSS370 Owner's Manual

Usb digital multimedia speakers
Hide thumbs

Advertisement

INSTALLATION

1 Windows 3.1 or a computer without USB
Connect the supplied 3.5 mm plug cord to the
LINE IN jack of the right speaker and your
soundcard.
Note: The volume has to be adjusted with
your soundcard.
or
Windows 95 and USB
Connect the supplied 3.5 mm plug cord to
the LINE IN jack of the right speaker and
your soundcard.
• Connect the USB cable to a USB port.
• Follow the instructions that come with the
supplied CD ROM to install the USB drivers
on your Windows 95 system. Do not use
the CD ROM when operating a Toshiba
Infinia!
or
Windows 98 and USB
Connect the USB cable to a USB port.
Note: If a soundcard is installed on your
Windows 98 system, follow the
98 setup as described later on.
8
2 Connect the left speaker to the SPEAKER OUT
jack of the right speaker.
3 Connect the SUBWOOFER OUT jack of the
satellite speakers and the AUDIO IN jack of
the subwoofer with the supplied 2.5 mm to
3.5 mm plug cord.
4 Connect the AC/DC adapter to the POWER IN
jack at the rear of the right speaker.
5 Connect the AC/DC adapter to a wall socket.
The voltage mentioned on the label of the
AC/DC adapter must match the local power
voltage.
6 Connect the power cord of the subwoofer to a
wall socket. The voltage mentioned on the
label of the subwoofer must match the local
power voltage.
Windows

Advertisement

loading

  Also See for Philips DSS370

  Related Manuals for Philips DSS370