CONTENTS On a personal note 4. Operation and service Foreword Maintenance Mains supply voltage Mains fuse Introduction Fuse type About this manual Replacing a blown fuse 22-23 Introduction to the Signature Series Firmware updating 24-25 Securing the CD drive 26-27 1.
FROM THE CREATOR Foreword First of all, thank you for choosing the Vitus Audio MP-T201 Mk.II Generally we’re after super neutral, super detailed and super dynamic CD Transport, we are sure you will enjoy it for many years to come.
This is your MP-T201 Mk.II owner’s manual. The following pages will, Important information is presented The Masterpiece Series was born out of requests from the market, It took us several years to get a foundation of products that as clearly as possible, describe how to get your MP-T201 Mk.II oper- like this.
1. GETTING STARTED 1. GETTING STARTED What’s in the box, and how MP-T201 Mk.II device overview to correctly unpack it Gently cut open the tape on the top of the box, making sure not The body of the MP-T201 Mk.II is constructed of Aluminium let the knife protrude too much.
1. GETTING STARTED 1. GETTING STARTED Turning the MP-T on and off Always turn on the products beginning from the source: Source Pre-amplifier Power amplifier Always turn off your products in reverse order: Power amplifier Pre-amplifier Source Not following this procedure, may cause damage to any of your products/speakers.
2. CONNECTING 2. CONNECTING Connecting the MP-T201 Mk.II The rear panel When placed on its shelf, connect the digital output’s of the MP-T201 Mk.II to your DAC. When the outputs have been connected, carefully connect the mains to the transport. ATTENTION: Never plug in/unplug any cables within the whole of the system while the MP-L201 Mk.II is operational.
3. OPERATION 3. OPERATION Operation modes Operation modes The MP-T201 Mk.II has 3 operation modes 1. NORMAL This is the mode you use when listening to music. 2. MENU In this mode you can alter the settings of the MP-T201 Mk.II. 3.
Page 9
3. OPERATION 3. OPERATION Functions – Functions – left front panel right front panel PLAY STOP PLAY STOP MENU SELECT NEXT MENU SELECT NEXT STANDBY STANDBY PREV PREV Normal mode Menu mode Normal mode Menu mode In normal mode there are 3 basic functions/buttons available You enter menu mode, by pushing the “MENU”...
Page 10
3. OPERATION 3. OPERATION The elements in the menu The MP-T201 Mk.II menu structure You can modify the settings of your MP-T201 Mk.II by entering the menu and selecting the options you require. Refer to the menu structure diagram on page 19 for specific information.
MP-T201 Mk.II show signs of malfunction, then please contact your to be done. tion. In case of malfunction the unit must be returned to Vitus Audio Replacing the fuse with a fuse of a type and rating different from dealer or Vitus Audio.
4. OPERATION AND SERVICE 4. OPERATION AND SERVICE Replacing a blown fuse Replacing a blown fuse REMOVE THE POWER CABLE Take a small flat bladed screwdriver and place it under Open the fuse carrier. Push the fuse carrier back into the back of the MP-T201. The fuse carrier is in place when you hear “CLICK”.
3. Insert the USB-Drive into the service port, located on the rear panel. You can contact your local Vitus Audio dealer if you are uncertain if your product contains the latest firmware. 4. Press the power button above the IEC inlet on the rear panel.
4. OPERATION AND SERVICE 4. OPERATION AND SERVICE Securing the CD-Drive Securing the CD-Drive During transport the cd-drive has to be secured to protect the suspension and the cd-drive against heavy shocks. Use the foam that you stored after unpacking the MP-T201. Remove the puck.
DRIVE Audio or an authorised Vitus Audio repair center by the customer damage to chassis parts. (See 6) at his or her sole expense. Vitus Audio will pay return freight of Drive mechanism CD-Pro8 2. CONDITIONS its choice.
7. EXAMPLES OF OPERATION 7. EXAMPLES OF OPERATION 7. EXAMPLES OF OPERATION Changing display brightness Configure auto standby PLAY STOP PLAY STOP MENU SELECT NEXT MENU SELECT NEXT STANDBY STANDBY PREV PREV EXAMPLE 2 EXAMPLE 1 Configuring auto standby Changing display brightness The MP-T201 Mk.II can be configured to automatically go into stand- The display on MP-T201 Mk.II can be set to different brightness by after a set time period, after no buttons on the remote...
7. EXAMPLES OF OPERATION Restore factory settings PLAY STOP MENU SELECT NEXT STANDBY PREV EXAMPLE 3 Restore factory settings The MP-T201 Mk.II can be restored to it’s factory settings if needed. Press the “MENU” button to enter menu mode. YOU PRESS YOU SEE Use the function buttons on the front of the unit to navigate to SETUP - RESET.
Page 18
HANDCRAFTED IN DENMARK AVA Group A/S (Vitus Audio) Hammershusvej 3L DK-7400 Herning Denmark Phone: +45 9626 8046 e-mail: sales@avagroup.nu Web: vitusaudio.com...
Need help?
Do you have a question about the MASTERPIECE Series and is the answer not in the manual?
Questions and answers