Pause And Wait Characters; Access Your Answering Machine (Example); Make A Second Call - Philips CT3328-BBUSA0P2 Manual

Table of Contents

Advertisement

as "touch tones". These are used to communicate passwords, callback
numbers, caller choices, and so on.
You can send DTMF tones at any time during a call by pressing any of the keys
0
number before dialling it (or storing it in the Phonebook). The phone number
and the DTMF part must be separated by a wait character.

Pause and wait characters

To obtain a pause or wait character, press and hold
for a wait and
character as a wait character. When you dial a number containing a wait
character, your phone dials the first part (the phone number) and then waits for
the call to be connected before sending the rest of the digits as DTMF tones.
Any subsequent pause character is an ordinary pause that generates a delay of
2.5 seconds.

Access your answering machine (example)

To hear all messages (e.g. code 3) on your answering machine (password 8421)
at phone number 12345678, you could call:
The phone dials 12345678 and waits for the call to be connected. When
connected, the phone transmits 8421 (the password), pauses 2.5 seconds, and
then sends the last digit. If you find that 2.5 seconds is not long enough for your
needs, you can enter several pause characters one after the other to increase
the pause time.

Make a second call

You can make a second call during an active call or during a call on hold. You can
switch between the two calls (the cost displayed on the screen depends on
local charge rate).
1
2
74
9
*
#
to
,
and
p
for a pause. The phone always interprets the first pause
While already on the phone, dial a number then press
put on hold and the number is displayed at the bottom of the screen. The
second number is then dialled.
To toggle between the two calls, press
time that you toggle from one call to another, the active call is placed on
hold and the call which was on hold is activated.
. You can also attach a DTMF sequence to a phone
12345678w8421p3.
,
#
. The display shows
(
. The first call is
then select
Switch
calls. Each
Other
operator
services
w

Advertisement

Table of Contents
loading

Table of Contents