Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CuddleCo Aria Wave Changer
Summary of Contents for CuddleCo Aria Wave Changer
- Page 1 Aria Wave Changer Assembly Instructions IMPORTANT! READ CAREFULLY. RETAIN FOR FUTURE REFERENCE.
-
Page 3: Safety Information
WARNING: Do not use this product without reading the instructions for use first. WARNING: Do not leave the child unattended. • Be aware of the risk of burning cigarettes, open fires, and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the changing unit. • A changing mat is not supplied with the changing unit. Recommended changing mat size is 70 x 45cm. Lay the mat on the top surface within the retaining barriers. • This changing unit is intended for children up to 12 months old, up to 11kg. • DO NOT use the unit if any part is missing, damaged or broken. Contact CuddleCo customer service for replacement parts and instructional literature if needed. DO NOT substitute parts. • Your child's safety is your responsibility. • Young children should not be allowed to play unsupervised in the vicinity of the unit. • Furniture can be dangerous if incorrectly installed, assembly should be carried out by a competent person. • Follow the instructions in detail to ensure the safety features of the unit are not compromised. -
Page 4: Product Care
Product Care Thank you for choosing CuddleCo. Rattan is a natural material which will have colour variation as it grows, this is part of the beauty of rattan and should not be considered a fault. As the furniture ages it may darken, especially when exposed to sunlight. There may be small cracks present in the outer layers of the rattan furniture when received;... - Page 5 Parts Changer back panel Side frame left Side frame right Base panel Shelf back panel Hanging rail Base panel Long fixing screws x10 Short fixing screws x8 Allen key...
- Page 6 Assembly Instructions Please note: Do not tighten screws fully until step 7. Step 1 Step 2 Attach changer back panel (1) to one of Attach shelf back panel (5) to the the base panels (4) screwing 2 short fixing remaining base panel (4) screwing short screws (B) through holes and secure with fixing screws (B) through holes and secure allen key (C). with allen key (C). Step 3 Step 4 Attach side frame right (2) to changer back Attach side frame right (2) to shelf back panel (1) with 1 short fixing screw (B). Attach panel (5) with 1 short fixing screw (B). Attach to base panel (4) with 2 long fixing screws to base panel (4) with 2 long fixing screws (A). Secure with allen key (C). (A). Secure with allen key (C).
- Page 7 Step 5 Step 6 Attach hanging rail (6) to side frame right (2) Repeat steps 3-5 with side frame left (3), with 1 long fixing screw (A) and secure with securing in place with fixing screws. allen key (C). Step 7 Step 8 Use allen key (C) to make sure all screws Return changer to upright position. Add are fully tightened and secure. Rubber feet changing mat of choice ready for use. can be adjusted to keep changer level.
- Page 8 Designed in the UK customerservice@cuddleco.co.uk cuddleco.co.uk...
Need help?
Do you have a question about the Aria Wave Changer and is the answer not in the manual?
Questions and answers