~$B-A65
(2)
Position of the heat pipe
|
es immediately after the transistor is heated.
(3) Inclination and temperature
in the lateral direction), there is no problem.
[2] Electronic Switches
(1) TC4066
@
Dual directional switch with independent
four channels.
@
Impedance between the input and output
of switch becomes lower with control in-
put CIN at "H'' level, and higher at ''L"
level.
@
Changeover
switch
with
linked
four
channels.
@ When
input terminal which is initialized
to pin
chanel (tuner) is set to ''L"'
with power on, output terminal comes to
"u'" level and output of other channels
comes to "L".
(3) TA9130
@
Changeover switch with independent four
channels.
@
Every time input terminal is set to a
output terminal turns over from "LL" to
"H'' and to "L".
[2] Truth Value Table
TC4066
Control Input | Impedance between IN/OUT
0.5 V5 x 10? ©
5
4/3
Figure 11
ae
2
D6 [No Use
Figure 12
TC9130
Control Input
Pin
es
28 eo
ee ee
[aa
[| HLT No Use
[43
[+ | = ML + | Loudness |
[14
= [H/L] = | + [Tape Monitor _|
Ps
ALL * [t+ | Mode |
Output
Pin
*No reference
Figure 13
Need help?
Do you have a question about the SB-A65 and is the answer not in the manual?