Table of Contents
Advertisement
Available languages
Available languages
Single building entry
MIS100D 1x58-64 Gas
2
ENSingle bu ilding en tr y
Table of Contents
1
Publishing Notes ...................................................... 16
2
Explanation of Symbols ........................................... 16
3
Tools and aids required ........................................... 16
4
Description .............................................................. 16
5
DN25 gas fittings from Schuck ................................ 17
6
Prepare assembly ..................................................... 17
7
MIS100D 1x58-75 SVS ............................................ 17
7.1
Assembly with Tangit expansion resin .................. 18
7.2
Assembly with expansion resin Resinator.............. 18
8
fittings from Schuck and pressure cover with
tensioning nut from Schuck .................................... 18
9
or dia. 10 mm ......................................................... 19
9.1
MIS100/58-75-SVS ............................................... 19
9.2
from Schuck ......................................................... 19
1 Publishing Notes
Copyright © 2022 by
Hauff-Technik GmbH & Co. KG
Department: Technical Editing
Robert-Bosch-Straße 9
89568 Hermaringen, GERMANY
Tel.
+49 7322 1333-0
Fax
+49 7322 1333-999
E-mail
office@hauff-technik.de
Internet
www.hauff-technik.de
Reproduction of this Installation instructions - even in
extracts - in the form of reprint, photocopy, on electronic
data media or using any other method requires our writ-
ten consent.
All rights reserved.
Subject to technical alterations at any time and without
prior announcement.
These installation instructions form part of the product.
Printed in the Federal Republic of Germany.
2 Explanation of Symbols
1
Work stages
► Effect/result of a work step
Reference numerals in drawings
16
3 Tools and aids required
For the correct installation of the single building
entry MIS100D 1x58-64 Gas, the following tools and aids
are required in addition to the usual standard tools:
Tools:
1 Drill for opening Ø 99 -103 mm
1 Hauff quick tensioning system, alternatively: tensioning
nut for gas fittings by manufacturer Schuck
1 Cartridge gun (with double chamber for double cartrid-
ges with resin "Resinator")
Plug connector for micropipe Ø 7 mm or Ø 10 mm
1 Folding ruler
1 Side cutter
Auxiliary
- Lubricant (e.g. soapy water)
- Marking pen
A cartridge gun (Art. No.: 5060050021) is requi-
red for the correct processing of the expansion
resin
Hauff-Technik (see Fig. 1).
A cartridge gun (Art. No.: 3030326996) is requi-
red for proper processing of the expansion resin
Resinator
Hauff-Technik (see Fig. 2).
The Hauff quick tensioning device MIS100D
1x58-75 SVS (Art. No.: 2900300695) is a reu-
sable assembly tool and can be ordered separa-
tely from Hauff-Technik (see Fig.: 4).
Alternatively: Clamping nut for gas fittings by
manufacturer Schuck (see Fig.: 5).
4 Description
Description: MIS100D 1x58-64 gas (see Fig.: 3)
Legend for Fig.3:
1
Gas fitting from Schuck
2
WAR90/100-1/63 (optionally with threaded plate
from Schuck)
3
Membrane tube
4
External flange with butyl tape and protective
membrane
5
Openings suitable for fibre optic cable 2x 10 mm
6
Openings suitable for fibre optic cable 2x 7 mm
7
Resin filler tube
Description: MIS100D 1x58-75 SVS (see Fig.: 4)
Legend for Fig.: 4
1
Pressure cover
2
Oval opening
Art. Nr.: 5090032028 Rev.: 02/2022-03-28
Tangit
. This can be ordered directly through
. This can be ordered directly through
EN
Advertisement
Chapters
Table of Contents
