Front Panel Controls - Zenith Concierge H27D35DT Installation & Operating Manual

Front Panel Controls

Use the front control panel to access the menus or just operate the TV
Note: Item 10 Key Defeat, in the installer's menu allows the installer to:
Set Menu Option 10, Key defeat to "0" - Front panel controls give access to menus.
Set Menu Option 10, Key defeat to "1" - Menus not available with front panel controls.
1
Press ON/OFF to turn on your TV.
2 To access the menus press the MENU button on the
control panel. Cycle through the various menus by
pressing the button repeatedly.
3
Press the SELECT button repeatedly to highlight the
option you want to modify.
4 Press either the Right or Left ADJUST button to modi-
fy the option you have chosen.
5
Press CAPTIONS to turn captions on and off.
The menu will disappear after a few seconds.
There are three jacks on the front of the TV that make con-
necting Audio/Video devices like camcorders very simple.
To use the front jacks as the signal source, simply plug a
composite video cable into the VIDEO jack. The TV will auto-
matically change its source setting to CAMPORT, as indicated
on the channel selection screen.
The Front Audio/Video jacks are a direct source connection.
If you have a device plugged into the front Video jack, you
will not be able to change channels until you have
unplugged the front Video jack.
Front panel control menu operation buttons are not labeled
and are not usually available to the guest.
You can use Ch to select channels and Vol to set the vol-
ume level regardless of the key defeat setting.
206-3489-O
Typical Front Panel Controls
VIDEO AUDIO
CAPTION
LEFT RIGHT
IN
3
4
5
Video
Video input.
Left/Right Audio
Audio stereo input.
OFF
VOL VOL CH CH
ON
1
2
P A G E 1 3