Table of Contents
Advertisement
PROGRAMMING YOUR
1. Setting the Clock:
flash continuously until you set the time.
Entering "Set lime" Mode:
set the time, hold down either the Hours or
begins to count up (about 2 seconds). You are now
in the "'Time Set" mode and can operate either but-
ton to achieve the desired setting. The buttons can
hc held down to scroll through the digits or pressed
and released lightly to advance one dlglt at a time.
first and then speed up to the rate of about three
per second. When the number displayed approach-
es the desired setting, release the hutton and press
to make sure that the PM indicator is on if a PM
desired.
time is
Exiting "Set Time" Mode:
The "Time Set" mode can he exited in
one of two ways:
1. Press anv button besides the Hours or Minutes
button. Th';s will exit the "Time Set" and activate
the selected function.
nothing. If neither the Hours nor Minutes
button is pressed for a period of five seconds, the
"Time Set" mode is exited.
2. Setting the Program Time:
To
Start Program Feature:
the unit to make coffee at the programmed
time, press the "Program" button and release it.
The green light next to the button will light. The
coffeemaker will start to brew at the l~rogrammed
time.
no time
If
appears when the hutton is pressed and
the green light turns off at the release of the but-
ton, it means that no program time has been set.
mode
The "Programmed"
cannot he entered mitil
Entering "Set Program Time" Mode:
Press and hold the Program Set button (about 2
seconds) until the green light hegins to flash. This
signals that
have entered the "Set Program
'lime" mode. 'I'he desired time can be set by press-
ing the Hours and Minutes buttons to scroll for-
either hutton will allow you to scroll continuousl!;
slowly at first, and accelerate to the r3te of about
three digits per second. As the desired time setting
approaches, release the button and then press
repeatedly to advance one digit at a time.
Exiting "Set Program Time" Mode:
"Set Program Time" may he exited in any
of three ways:
1. Press the Program Set button. 'l'his will cause
the coffeemaker to revert to its previous state. If it
was OFF, it will return to the OFF position. If
"Programmed", it will revert to this state, and
so on. This is a safety feature.
2. Press any other button (except Hours or
Minutes). "Set Program Time" will be exited and
the function of that hutton will he executed.
button is pressed for a period of fire seconds, the
grammed setting will he in effect.
PROGRAMMING
AUTOMATIC-OFF TIME
anywhere from immediate shut off after completion
hours. U'hen the
of the I)rey cycle to four
coffeemaker shuts itself off, two tones will sound.
Four
hours is the default time. The 0:OO setting
shuts the unit off immediately after brewing is
complete. 'Ii) check the current setting, press and
hold the On/Off button and the Automatic-Off
time is displayed.
On/Off hutton until the red "power" light begjns to
flash. This signals that you have entered the "Set
mode. Press the Hours and
Automatic-Of?
until desired time appears. Thus, the first setting
can he
programmed
Hide quick links:
Advertisement
Table of Contents
