Yamaha QY-100 Data List page 50

00000000
0ccccccc
11110111
For Addresses and Byte Counts, refer to the attached tables.
Check sum is the value which produces a lower 7 bits of zero when the Byte Count, Start Address, Data,
and the Check-sum itself are added.
513 bytes or more must not be transmitted at once. Thus, if a Dump Request for 513 or more bytes is
received, the date will be divided into packets of 512 bytes or less, and transmitted at an appropriate
timing interval (120 msec or longer).
The following five types are transmitted and received. (Transmitted only if a Bulk Dump Request is
received.)
System Data
Multi Effect Data (for each module)
Multi Part Data (for each part)
Drums Setup Data (for each note)
System Information (transmitted only)
(3-6-5) DUMP REQUEST
(3-6-5-1) XG DUMP REQUEST
11110000
01000011
0010nnnn
01001100
0aaaaaaa
0aaaaaaa
0aaaaaaa
11110111
For Addresses and Byte Counts, refer to the attached tables.
The following four types are received.
System Data
Multi Effect Data (for each module)
Multi Part Data (for each part)
Drums Setup Data (for each note)
(3-6-6) XG PARAMETER REQUEST
11110000
01000011
0011nnnn
01001100
0aaaaaaa
0aaaaaaa
0aaaaaaa
11110111
For Addresses and Byte Counts, refer to the attached tables.
The following four types are received.
System Data
Multi Effect Data
Multi Part Data
Drums Setup Data
50
M I D I
00
| |
ccccccc
F7
F0
43
2n
4C
aaaaaaa
aaaaaaa
aaaaaaa
F7
F0
43
3n
4C
aaaaaaa
aaaaaaa
aaaaaaa
F7
D a t a F o r m a t
Data
Check-sum
End of Exclusive
Exclusive status
YAMAHA ID
device Number
Model ID
Address High
Address Mid
Address Low
End of Exclusive
Exclusive status
YAMAHA ID
device Number
Model ID
Address High
Address Mid
Address Low
End of Exclusive