Table of Contents
Advertisement
Editing VL Voice Part Parameters
The editings done to the parameters below affect all the voices. In other words the voices cannot
be individually edited. The parameter settings are effective even when you select a different
voice.
• The edited voices cannot be stored in the INTERNAL voice bank. Instead, the VL-XG voices edited using XG Editor
Window of the "XGworks" can be saved as a part of the song data.
1.
Enter the Multi Part Edit Mode.
The sub-mode menu appears on the LCD.
2.
Press SELECT button to place the cursor to PLUGIN.
3.
Press ENTER.
The Part Parameter Edit display exclusive to the PLG100-VL appears.
4.
Press SELECT button to select the parameter you want to edit.
5.
Use VALUE button to set the value of the selected parameter as required.
6.
Press the EXIT button to quit editing.
• The part parameters available with the "mother" tone generator can also be applied to the VL voices except
for the following parameters: HPF Cutoff Frequency, EQ Low/High Frequency, Element Reserve and Ve-
locity Limit Low/High.
15
Advertisement
Table of Contents
