Before Turning On The Mixer; Turning The Power On/Off; Computer System Requirements; Cubase Ai 4 System Requirements - Yamaha MG166 Owner's Manual

Introduction

Before Turning on the Mixer

1
Be sure that the mixer's power switch is in the
STANDBY position.
Use only the included power adaptor (PA-30) or
an equivalent recommended by Yamaha. Use of a
different adaptor may result in equipment dam-
CAUTION
age, overheating, or fire.
2
Connect the power adaptor to the AC ADAPTOR IN
q
connector ( ) on the rear of the mixer, and then
turn the fastening ring clockwise (
connection.
3
Plug the power adaptor into a standard household
power outlet.
• Be sure to unplug the adaptor from the outlet
when not using the mixer, or when there are
lightning storms in the area.
CAUTION
• To avoid generating unwanted noise, make
sure there is 50 cm or more between the power
adaptor and the mixer.

Turning the Power On/OFF

Press the mixer's power switch to the ON position.
When you are ready to turn the power off, press the
power switch to the STANDBY position.
Note that trace current continues to flow while the
switch is in the STANDBY position. If you do not plan
to use the mixer again for a long while, please be sure
CAUTION
to unplug the adaptor from the wall outlet.
6
MG206C-USB/MG166CX-USB/MG166C-USB Owner's Manual
Windows Vista
w
) to secure the
Windows XP
w
q
Macintosh
Windows
Macintosh

Computer System Requirements

Windows-based computer with built-in USB inter-
Computer
face
OS Windows Vista
1 GHz or higher Intel Core/Pentium/Celeron proces-
CPU
sor
Memory 1 GB or more
Windows-based computer with built-in USB inter-
Computer
face
OS Windows XP Professional/XP Home Edition
750 MHz or higher Intel Core/Pentium/Celeron pro-
CPU
cessor
Memory 96 MB or more (128 MB or more recommended)
Computer Macintosh computer with built-in USB interface
OS MacOS X 10.3.3 or higher
CPU Macintosh G3 300 MHz or higher/Intel processor
Memory 128 MB or more
Cubase AI 4 System Require-
ments
OS Windows XP Professional/XP Home Edition
CPU 1.4 GHz or higher Intel Pentium processor
Memory 512 MB or more
Audio
Windows DirectX compatible
Interface
Hard Disk 400 MB or more
OS MacOS X 10.4 or higher
CPU Power Mac G4 1 GHz/Core Solo 1.5 GHz or higher
Memory 512 MB or more
Hard Disk 400 MB or more
• A DVD driver is required for installation.
NOTE
• To activate your software license, install the application
while the computer is connected to the internet.