Advertisement
Installing Equalizer601
See the Add-On Effects Installation Guide for more information on installing Equalizer601.
Installing Equalizer601
As with other effects, you can recall and edit the Equalizer601 program on the console or in Studio Manager.
The basic operation is as follows:
1
Select one of the internal effects processors.
2
Patch the signal to and from the currently selected effects processor.
3
Locate the Effects Library page.
4
Select and recall Equalizer601.
n
When you recall the program, all effects processor outputs will be muted temporarily.
5
Locate the Effects Edit page.
6
Set the parameters. (See the
parameters.)
The procedure for recalling and editing Equalizer601 varies depending on the console you are using.
Refer to the Owner's Manual that came with your console for more information.
Editing Parameters in Studio Manager
In Studio Manager, editable parameters appear in both the Equalizer601 window and the Generic Editor window.
The Equalizer601 window enables you to edit Equalizer601 specific parameters, and the Generic Editor window
enables you to edit parameters common to Equalizer601 and other Effects.
Refer to the Studio Manager Owner's Manual for your console for more information on the Generic Editor
window.
"Part Names and Functions"
Studio Manager Generic Editor Window
2
section for more information on Equalizer601
Advertisement
