Advertisement

Quick Links

OVERBED TABLE -
Thank you for choosing this Overbed Table – L100.

1 General

1.1 Symbols

Signal words are used in this manual and apply to hazards or unsafe practices which
could result in personal injury or property damage. See the information below for
definitions of the signal words.
Warning indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
Important
Indicates a hazardous situation that could result in damage to property if it is not
avoided.
Gives useful tips, recommendations and information for efficient, trouble-free use.

1.2 Safety

Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use.
Contact carrier or dealer for further instruction.
Weight Limitation
The horizontal and vertical static loading limitation of the OT103 is 25 kg (55 lbs).
General Warnings
DO NOT use this product or any available optional equipment without first
completely reading and understanding these instructions and any additional
instructional material such as owner's manuals, service manuals or instruction
sheets supplied with this product or optional equipment. If you are unable
to understand the warnings, cautions or instructions, contact a healthcare
professional, dealer or technical personnel before attempting to use this
equipment - otherwise, injury or damage may occur.
ALWAYS check the overbed table for proper tightness before using.
THE technical improvements of products will be compiled into new version of
user manual without notice. Please in kind prevail if the appearance and color of
products are changed.
Accessories Warning
IDEAL products are specifically designed and manufactured for use in conjunction
with IDEAL accessories. Accessories designed by other manufacturers have not
been tested and are not recommended for use with IDEAL products.
Installation Warning
ALWAYS use extreme caution when installing the column assembly, because
it is with a sharp in the end of horizontal tub, please don't touch the sharp
before completion of installation, otherwise injury or damage might occur. After
any adjustments, repair or service and before use, make sure that all attaching
component parts are secure.

1.3 Intended use

The overbed table as a kind of furniture is designed for use as a movable table
top surface for reading, eating, or keeping small personal items such as glasses,
telephone, or books within easy reach.

2 Parts (Packing) List

3 Assembling the Overbed Table

• Open end of box and then slide contents out of box.
• Collect base with castors, lifting column, table top and its support, hardware, hand
crank and user manual.
When installing, please perform installation operations on flat ground.
Installation can be completed in just 4 easy steps.
The overbed table is mainly composed of the following materials:
1. Medium density fiberboard (Table top)
2. Steel Pipe (Table frame)
3. Fastener (Screw, Hand crank)
4. Plastic (Tube plug, Castor)

4 Using the Overbed Table

Not only is this overbed table easy to install, it is also easy for the user to use. Adjust
the tabletop to the user's desired height by turning the hand crank as FIGURE 1.
FIGURE 1 Using the Overbed Table
This table is designed for use as a movable patient/resident table top surface for
reading, eating, or keeping small personal items such as glasses, telephone, or
books within easy reach.
This table is designed for indoor use ONLY within close proximity of skilled
caregivers. It is not designed to hold electrical items (such as televisions,
computer monitors, coffee pots, etc.) and should not be used near open flames
and excessive heat.
Maximum weight limitation for this product is 25 kg (55 lbs); weight should be
evenly distributed over the table top surface to help maintain a stable condition.
DO NOT overload the table as that could result in breakage, as well as damage to
property and/or serious injury.
Use ONLY as directed for its intended use. This product should NOT be used: as
a sleep surface; as a walker or mobility aid to assist a person in walking, sitting
down or standing
up; to prevent or brace a person's fall; or to help transport persons or items.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OT103 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gima OT103

  • Page 1 Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact carrier or dealer for further instruction. Weight Limitation The horizontal and vertical static loading limitation of the OT103 is 25 kg (55 lbs). General Warnings DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction...
  • Page 2 Net weight 11.5 kg Gross weight 13 kg Package size 820 * 90 * 430 mm OT103 (GIMA 27487) Imported by: Manufactured by: Gima S.p.A. Suzhou Ideal Medical Co., Ltd. Via Marconi, 1 - 20060 Gessate (MI) Italy No. 88 Huachi Street, gima@gimaitaly.com - export@gimaitaly.com...

This manual is also suitable for:

27487

Table of Contents