Pattern Name - Yamaha DX200 Owner's Manual

DX200 Parameters .......................................................

Pattern Name

Settings: 1 ... 0, A ... Z, -, ., space, (ASCII 20H ... 7FH)
This determines the name of the pattern being edited. Up to ten characters can be
entered. (In the DX200 Editor window, both uppercase and lowercase letters can be
entered.)
1) Click on the PATTERN NAME box.
2) At the cursor position, type the desired name. Up to ten characters
(uppercase or lowercase) can be entered.
3) Store the pattern, if desired.
FM Level
Range: 0 ... 127
This determines the level of FM signal.
Noise Parameter
• Noise level
Range: 0 ... 127
This determines the level of the Noise. The higher the value, the greater the Noise Level.
When not using Noise, set the value to "0."
• Noise OSC Type
Settings: White, Pink, UpSlow, UpMid, UpHigh, DownSlow, DownMid,
DownHigh, PitchScale1...4, Variation1...4
This is used to select the type of Noise signal.
For detail of types, refer to the DX200 Editor Owner's Manual.
Parameters /
21
DX200 Editor Main Window