Advertisement
In the following section:
Functions marked with
Studio Manager
Functions marked with
Console
1
1
EFFECT NAME
The effects name appears here.
3
7
8
2
[OPEN/CLOSE]
Click here to open or close the parameter window.
3
[Reverb Time]/[REV TIME]
Duration of time until the reverberation attenuates and stops. Higher values extend the reverberation.
In Studio Manager, drag the icon
n
The range is from 0.3s through 30.0s. However, the range varies depending on the Room Size setting.
4
[Initial Delay]/[INI.DLY]
Duration of time between sound input and the start of reverberation. Higher values delay the start of
reverberation.
In Studio Manager, drag the icon
n
The range is from 0.0ms through 125.0ms.
5
[Decay]/[DECAY]
Shape of reverberation envelope. Reverberation characteristics are determined by the value.
In Studio Manager, drag the icon
n
The range is from 0 through 53.
are available in Studio Manager.
are available on the console.
Studio Manager
Console
4
6
9
Studio Manager
Studio Manager
to change the value.
Studio Manager
to change the value.
Studio Manager
Console
to change the value.
1
3
4
5
6
7
)
!
5
@
Console
Console
4
2
8
9
)
!
@
Advertisement
