Direct Installation - Yamaha 01V96 Installation Manual
Add-on effects
Hide thumbs
Also See for 01V96:
- Owner's manual (402 pages) ,
- Service manual (101 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
Direct installation
If you can access the Internet directly from your computer,
follow the steps below to install the software. See page 7 if
you access the Internet from a different computer.
NOTE: The following instruction refers to the installation of the
software in the 02R96 from a connected computer that runs
Windows 98SE. However, the basic installation procedure also
applies to any OS or console. Steps that vary with different
operating systems will be explained separately.
NOTE: If an error message appears, refer to the Error Message
list on page 11.
1
Start the computer and check to see if the
following steps are complete.
• Installing the Yamaha USB-MIDI Driver in the
computer (See the included Studio Manager
Installation Guide.)
• Accessing the Internet from the computer
• The console’s system software has been updated to
version 2.0 or later (You don’t need to check this on
the PM5D).
NOTE: Don’t connect your computer to the console yet.
2
While holding down the following key on the
console, turn on the power of the console.
Continue holding down the key until the display blinks
“FLASH UPDATE.”
DM2000: Transport [REC] key
02R96: MACHINE CONTROL [REC] key
DM1000: MONITOR [CLEAR] key
01V96: SOLO [CLEAR] key
PM5D: SCENE MEMORY [RECALL] key
3
Make sure that the display indicates “FLASH
UPDATE,” and then use a USB cable to connect
your computer to the console.
4
Insert the included CD-ROM into the CD-ROM
drive.
5
Locate the Upgrade folder on the CD-ROM
(“Mac OS 9: Upgrade” for Mac OS 9; “Mac OS
X: Upgrade” for Mac OS X), then copy the
folder onto the hard disk.
6
Double-click “DMUpgrade.exe” (or
“AE***UpgradeE” for Mac OS) in the Upgrade
folder that you copied to the hard disk.
The installer window opens.
7
Select [Authorize], then click [Next].
The following window opens.
8
Select [Get access key from authentication
server], then click [Next].
The following window opens.
5
- Quick Links:
- Installing Add-On Effects
Hide quick links:
Advertisement
Table of Contents
