Citel SFD1-13-20S Assembly Instructions

N210101B
ASSEMBLY INSTRUCTIONS - NOTICE D'ASSEMBLAGE
NOTICIA DE INSTALACIÓN - MONTAGEANLEITUNGEN
ISTRUZIONI DI MONTAGGIO
INSTRUÇÕES DE MONTAGEM - MONTÁŽNÍ NÁVOD
- 组装说明
Microswitch for Remote signal
SFD1-13-20S & SFD1-13-40S
SFD1-25-20S & SFD1-25-40S
Microswitch 3 P + Microswitch 1 P
2 x Microswitch 1 P
Assembly
SFD1-13-20S SFD1-13-40S
2 x Microswitch 1 P Microswitch 3 P + Microswitch 1 P
1
Connect the Fuse holder
by the main terminals
14 mm
0.55 in
2.0 - 3 Nm
22 - 27 Lb-In
4
Then connect the microswitch following the insctructions in the Installation Sheet (N201102 & N201103)
SFD1-25-20S
2 x Microswitch 1 P Microswitch 3 P + Microswitch 1 P
3
2 Push in horizontal movement
Put on the microswitch
on the guides to the nal position.
Identi cation - Labels
Labels are provided by a batch of 4, for each SFD fuse holder.
SPD SPD
DISCONNECTOR DISCONNECTOR
25 mm
SPD SPD
DISCONNECTOR DISCONNECTOR
SFD1-25-40S
40 mm
1
Cut labels at the right dimensions,
2
Open the label-holder part when the
fuseholder is totally closed or totally open,
SFD1-25
22x58
SPD
DISCONNECTOR
SPD SPD
16 mm
DISCONNECTOR DISCONNECTOR
1
SPD SPD
16 mm
DISCONNECTOR DISCONNECTOR
3
Put on the label,
and close.
NC NO C
3
SPD
SPD
PARAFOUDRE
PARAFOUDRE SFD1-13
14x51
SPD
DISCONNECTOR
2