Properties; System Properties - Philips COLOR TOUCH SCREEN REM CONT W-DATABASE TSU6000 User Manual

ProntoProEdit 3.0 - User Manual

Properties

Philips
After you have created the devices, macro groups, panels, frames and
buttons you want to use in your CCF, you can start configuring the CCF by
using the Properties windows.

System Properties

The System Properties enable you to change the general features of the
ProntoPro. You can configure the hard key actions globally.
You can define the following functions in the different tabs:
Tab
Pronto System

Properties

RF
Hardkeys
Opening the System Properties
Click on next to HOME in the Configuration view.
1
A list of panels appears.
2 Double-click the panel Properties.
The 'ProntoPro Properties' window appears.
See "Programming" on page 49 for instructions for programming macro
groups and hard keys.
See "RF Settings" on page 57 for instructions for selecting a RF Channel.
See "Setting the System Properties for the
instructions for setting the system properties.
Functions
To set the (factory) default CCF, to write-protect
the CCF and the Home panels, to create device
aliases and to enter the version string.
To select a RF Channel for the ProntoPro.
To configure the hard key actions globally. For
each hardkey you can create an alias to another
command, set a delay, assign IR codes, add a
beep, add a timer, create a jump.
ProntoPro" on page 67 for
Configuring a CCF
Page 44 of 76