Operation Modes - Sven PS-740 User Manual

User Manual
Socket

OPERATION MODES

Bluetooth mode
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to com-
•
patible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or oth-
er electronic devices can interfere with the signal transfer.
Turn on the speaker system Bluetooth mode — press button МODE l several times until
•
display shows "bt" inscription.
It is necessary to select the search mode of devices with Bluetooth on a signal source (tele-
•
phone, notebook, smartphone, etc.). "SVEN PS-740", massage will be displayed on the screen
which is to be connected to*.
When connection is successful, there will be a short beep and the indication of the search
•
mode on speaker system is over**.
* You might have to enter "0000" code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name "SVEN PS-740" and the "connect"
command on the source.
Connecting to the speaker via Bluetooth using NFC
NFС works only with Android devices (version 4.1 and later).
To connect the speaker to a smartphone, the smartphone must be equipped with an NFC chip.
It must be enabled in the wireless settings.
Turn on the speaker system Bluetooth mode — press button МODE l several times until
•
display shows "bt" inscription.
Hold the phone close to the NFC mark o on the top panel and wait for a short beep to confirm
•
a successful speaker connection.
Note. You need to allow connections on the phone (depending on the phone's operating system).
Radio mode
Attention! To improve the reception quality of the radio signal, connect the 3.5 mm mini-jack
cable (included) to the AUX input e.
PC
Mobile
device
Mini-jack to mini-jack
signal cable
USB to USB type-C
USB power
power cable
adapter
Fig.3. Connection diagram
ENG
PS-740
5