Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FLEXSTAR 645W LED SE Series
Summary of Contents for FLEXSTAR 645W LED SE Series
- Page 1 645W LED SE Series USER MANUAL...
-
Page 2: Product Description
USER MANUAL 1. INTRODUCTION Thank you for purchasing the FLEXSTAR® 645W LED SE SERIRS grow light. Our manual will describe the installa- service personnel mount and install this device. Please read and understand this manual in its entirety before 2. PRODUCT DESCRIPTION in greenhouses or in climate-controlled rooms. -
Page 3: Safety Recommendations And Warnings
645W LED SE Series USER MANUAL Spectrum ＞ ＞ 3.2 ENVIRONMENT This product is intended to be used in greenhouses and climate-controlled rooms and can be used in damp environments. However, please DO NOT use this product outdoors or in wet environments and do not 68 ~ 95°... -
Page 4: Installation
645W LED SE Series USER MANUAL -- Condensation, humidity, heavy mist, fog, or direct spray; -- Dust and/or contamination; -- Direct sunlight during use or HID light that could heat up the power supply enclosure. Always allow for a cool down period of at least 30 minutes before touching the LED bars. Touching the LED temperatures of >104°... -
Page 5: Installation Preparations
645W LED SE Series USER MANUAL 6.1 INSTALLATION PREPARATIONS structures include pallet racks, trusses, structural channels, Unistrut, and rolling tables. For optimal results, Warning! Note: Take caution if you touch the LED bars. Ensure the LED array does not come in contact with sharp objects... - Page 6 645W LED SE Series USER MANUAL possible. you can adjust the position of the lights by sliding the decking mounts across the crossbars and settle it in the appropriate location for your growing operation. Please refer to paragraph 6.4 If you plan to use a Master Controller, continue to paragraph 6.5.
- Page 7 645W LED SE Series USER MANUAL If you do use a Master Controller, continue at paragraph 6.5 6.4 MOUNTING THE POWER SUPPLY ENCLOSURE bars, remote mount to a surface or hang up with the waterfall mounts. outlet on the power supply enclosure.
- Page 8 645W LED SE Series USER MANUAL enclosure. Attach the locking receiver to the nail on the wall. outlet on the extension cord, then connect the extension cord’s the M19 male connector to the appropriate female outlet on the power supply.
- Page 9 645W LED SE Series USER MANUAL We have included a black controller cable along with the controller to connect the controller to the input Use a black 6p4c modular jack interconnect cable with an integrated ferrite core to connect the output of Warning! Ensure the power cord and the controller cables do not touch any of the LED bars.
-
Page 10: Inspection, Maintenance And Repair
645W LED SE Series USER MANUAL 6.6 CONNECTING THE LED FIXTURE TO THE MAINS Warning! Caution! Ensure the cord is not coiled and does not touch any hot surfaces. Warning! Connect the cables according to local rules, safety regulations and electrical code. -
Page 11: Warranty
645W LED SE Series USER MANUAL 10.WARRANTY The company warrants the mechanical and electronic components of this product and guarantees the materi- from the original date of the purchase. but are not due to improper use or user error, the company shall, at its discretion, either replace or repair the product using the appropriate new or reconditioned parts. - Page 12 645W LED SE Series USER MANUAL 645W LED SE Series...
Need help?
Do you have a question about the 645W LED SE Series and is the answer not in the manual?
Questions and answers