See "Troubleshooting" to solve minor problems before calling service support. If you need service support, be sure to have the following data (found on the data plate located behind the filter) available when calling your Bluewater dealer: – Model – Product number – Serial number Environment information The water purifier is more efficient when purifying water for longer periods.
TDS/Conductivity tester at least one time every year to make sure that Spirit performs correctly. For options, contact your Bluewater dealer. If there is any indication that the purified water tastes, smells bad, is cloudy, or there is a presence of particles, do not drink.
Page 5
If the water purifier is disconnected from water and electricity for >5 days, store it as described in Complete User manual “Put into storage. ” Contact your Bluewater dealer for advice before moving the water purifier from one place to another.
Spirit outside 2 3 4 10 11 12 13 Figure 1. Spirit outside Description Description Control panel Bluewater LED faucet connection ON light Inlet water tube and fittings FILTER light Inlet Grid Filter SERVICE light Inlet water connection Front cover...
The Spirit water purifier is intended to produce purified water only for home environment and household use. Any other purpose shall be considered as unintended use and will automatically void your warranty, unless the application is approved, installed, and monitored by a Bluewater authorized distributor or dealer. Spirit Owner’s manual...
Do not drink the water until this flush is complete. See Complete User Manual for instructions on the Commissioning Flush. We recommend that the water purifier be installed by a Bluewater dealer. Installation instructions can be found in the Complete User manual and on www.bluewatergroup.com. Leak protection system A sensor at the bottom of the water purifier senses water leaks.
Water production Be aware! If the SERVICE light is On or Flashing when the purified water faucet is turned on, do not use or drink the water. Let the water run until the SERVICE light goes out. If the SERVICE light is still On after 120 seconds, see “Troubleshooting.
Descale 1 year Test the purified water every year using a TDS/Conductivity tester. If the purified water is not clean, do not drink it. Contact your Bluewater dealer. 3–5 years* Replace reverse osmosis membrane. Contact your Bluewater dealer. *Frequency depending on water quality and usage...
Page 13
Only connect to the cold water supply. The temperature limits are in the table below. If the inlet water quality changes greatly, contact your Bluewater dealer for advice. For more detailed technical information see www.bluewatergroup.com Description Temperature [°C (°F)]...
See Complete User manual. has lapsed. The filter should be replaced. The SERVICE light is If the SERVICE light continues Contact your Bluewater dealer Flashing slowly after 30 Flashing slowly beyond 30 to replace the RO membrane. seconds.* seconds, this indicates that...
The inlet pressure was lower than If the water purifier stops, is due to low inlet water 1.5 bar (22 psi) during operation. contact your Bluewater dealer. pressure. The ON light is Flashing The faucet is not completely Close the faucet.
Page 20
Bluewater is a world leading water purification company. Headquartered in Stockholm, Sweden, the company helps people and businesses globally enjoy the health and wellbeing benefits of cleaner, healthier tap water. Bluewater innovates, makes, and sells compact water purifiers that harness the company’s patented reverse...
Need help?
Do you have a question about the Spirit 300Cp and is the answer not in the manual?
Questions and answers