Yamaha PSR-E323 Owner's Manual page 62

About MIDI
Transferring a backup file from the PSR-
E323/YPT-320 to a computer
You can transfer backup data (page 41) other
than "Passing status of Song and Step" to a com-
puter as a "backup file" by using Musicsoft
Downloader. Move the file from "System Drive"
under "Electronic Musical Instruments" to the
computer via the Musicsoft Downloader. For
details about how to transmit backup files, refer
to the Online help topic "Transferring Data
Between the Computer and Instrument (for
unprotected data)" of the Musicsoft Downloader.
● Data that can be transferred to a
computer from the PSR-E323/YPT-
320
• Backup file (09PK3.BUP: backup data
containing five User Songs)
• Songs transferred from a computer
NOTE
• Preset Song data cannot be transmitted from the PSR-E323/
YPT-320.
CAUTION
• The backup data, including the five User Songs is trans-
mitted/received as a single file. As a result, all backup
data (including the five Songs) will be overwritten every
time you transmit or receive. Keep this in mind when
transferring data.
• Do not rename the backup file on the computer. If you do
so, it will not be recognized when transferred to the
instrument.
62
PSR-E323/YPT-320 Owner's Manual
● Erasing Transferred Song Data from
the PSR-E323/YPT-320 Memory
To erase all Songs transferred from the computer,
use "flash clear" function on page 41.
To erase specific Songs transferred from the
computer, use the Delete function on Musicsoft
Downloader.
● Using Transferred Songs for Lessons
In order to use Songs (only SMF format 0)
transferred from a computer for lessons it is
necessary to specify which channels are to be
played back as the right-hand and left-hand parts.
Refer to the "Lesson Track (R)" or "Lesson Track
(L)" in the Function Setting List on page 57. The
procedure for setting the "guide track" is as follows:
Select a transferred Song you want to use for
lessons. Press the [FUNCTION] button a number
of times until the "R-Part" or "L-Part" appears in
the display, and then use the number buttons [0]–
[9], [+], [-] to select the channel you want to play
back as the specified right- or left-hand part.
We recommend that you select channel 1 for the
right-hand part and channel 2 for the left-hand
part.