Effect Map - Yamaha PortaTone PSR-275 Owner's Manual

NOTE:
*1 By default (factory settings) the PSR-275/273 ordinarily functions as a 16-
channel multi-timbral tone generator, and incoming data does not affect
the panel voices or panel settings. However, the MIDI messages listed
below do affect the panel voices, auto accompaniment, and songs.
• MIDI Master Tuning
• System exclusive messages for changing the Reverb Type and Cho-
rus Type.
*2 Messages for these control change numbers cannot be transmitted from
the PSR-275/273 itself. However, they may be transmitted when playing
the accompaniment, song or using the Harmony effect.
*3 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
• This message automatically restores all default settings for the instru-
ment, with the exception of MIDI Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
• This message allows the volume of all channels to be changed simul-
taneously (Universal System Exclusive).
• The values of "mm" is used for MIDI Master Tuning. (Values for "ll" are
ignored.)
<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc,
F7H
• This message simultaneously changes the tuning value of all chan-
nels.
• The values of "mm" and "ll" are used for MIDI Master Tuning.
• The default value of "mm" and "ll" are 08H and 00H, respectively. Any
values can be used for "n" and "cc."
I Effect map
* If the received value does not contain an effect type in the TYPE LSB, the LSB will be directed to TYPE 0.
* The numbers in parentheses in front of the Effect Type names correspond to the number indicated in the display.
* By using an external sequencer, which is capable of editing and transmitting the system exclusive messages and
parameter changes, you can select the Reverb and Chorus effect types which are not accessible from the PSR-
275/273 panel itself. When one of the effects is selected by the external sequencer, " - " will be shown on the
display.
G REVERB
TYPE
MSB
00 01
000 No Effect
001 (1)Hall1
002 Room
003 Stage
004 Plate
005 – 127 No Effect
G CHORUS
TYPE
MSB
00 01
000 – 063 No Effect
064 Thru
065 Chorus
066 Celeste
067 Flanger
068 – 127 No Effect
TYPE LSB
02 08
(2)Hall2
(6)Stage1
(8)Plate1
TYPE LSB
02 08
(2)Chorus2
(3)Flanger1
MIDI Implementation Chart
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
• mm : Reverb Type MSB
• ll : Reverb Type LSB
Refer to the Effect Map (page 69) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
• mm : Chorus Type MSB
• ll : Chorus Type LSB
Refer to the Effect Map (page 69) for details.
*4 When the accompaniment is started, an FAH message is transmitted.
When accompaniment is stopped, an FCH message is transmitted.When
the clock is set to External, both FAH (accompaniment start) and FCH
(accompaniment stop) are recognized.
*5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Value for "n" is ignored.
16 17 18
(3)Hall3
(4)Room1
(7)Stage2
(9)Plate2
16 17 18
(1)Chorus1
(4)Flanger2
19 20
(5)Room2
19 20
69