Button - Yamaha Portable Grand DGX-230 Owner's Manual

Record Your Own Performance
2
Select the track(s) you want to record to and confirm your
selection on the display.
◆ Record a Melody Track and the Accompaniment Track
Together
Press the melody track button [1]–[5] you want to record to while hold-
ing the [REC] button.
Next, press the [A] button while holding the [REC] button.
The selected tracks will flash in the display.
Press and hold
◆ Record a Melody track
Press the melody track button [1]–[5] you want to record to while hold-
ing the [REC] button.
The selected track will flash in the display.
To cancel recording to a selected track, press that track button a sec-
ond time. Style accompaniment cannot be turned on or off while
recording is in progress.
3
Recording will start when you play on the keyboard.
You can also start recording by pressing the [START/STOP] button.
The current measure will be shown on the display during recording.
4
Stop recording by pressing the [START/STOP] or [REC]

button.

46
DGX-230/YPG-235 Owner's Manual
Recording
starts
or
• If you record to a track that
NOTE
• Style accompaniment is auto-
• Style accompaniment cannot
User 1
• If you use a split voice for
001
rEC
NOTE
• If style accompaniment is on
User 1
001
rEC
NOTE
• If the memory becomes full dur-
User 1
003
rEC
Current measure
CAUTION
contains previously-recorded
data the previous data will be
overwritten and lost.
matically turned on when you
select the style track [A] for
recording.
turned on or off while recording
is in progress.
recording, notes played to the
left of the split point will not be
recorded.
and track [A] has not yet been
recorded, the style track [A] will
automatically be selected for
recording when a melody track
is selected. If you only want to
record a melody track, be sure
to turn the style track [A] off.
ing recording a warning mes-
sage will appear and recording
will stop automatically. Use the
song clear or track clear (page
48) function to delete unwanted
data and make more room avail-
able for recording, then do the
recording again.