To achieve optimum volume balance between the
YST-SW205 Subwoofer and the NS-A580 Main
perform the following procedure:
1. Insert the YST-SW205's power plug into an AC outlet.
2.On the YST-SW205's rear panel, set the POWER switch
to the ON position and the AUTO STANDBY to
Set the PHASE switch to the NORM position.
4.On the YST-SW205's front panel, set the VOLUME
control to 0 (minimum setting), the HIGH CUT
control to its midpoint position, and the B.A.S.S.
button to the MUSIC position, for audio software
(CD's) bass sound, or MOVIE position for best video
Press the STANDBY/ON button to the on position.
The indicator light will light up green. Then power
on all other components.
U I C K
5. Play an audio source and adjust the HTR-5560's
VOLUME control to a desired listening level.
6. On the YST-SW205's front panel, increase the
VOLUME control gradually to adjust the balance
the volume between the YST-SW205 Subwoofer and
the NS-A580 Main Speakers.
NOTE: Once the volume is balanced between the
subwoofer and the main speakers, you can adjust the
volume of your whole sound system by using the
HTR-5560's VOLUME control.
O N N E C T
U I D E