Do you have a question about the ZCK-192S and is the answer not in the manual?
Questions and answers
Larry
March 13, 2025
How to open the door after receiving?
1 comments:
Mr. Anderson
May 14, 2025
To open the door on a Kegco ZCK-192S after receiving it, pull the door handle and open it normally. Ensure the door is closed tightly after use and avoid opening it frequently or for long periods to maintain the desired temperature.
Page 1
INSTRUCTION MANUAL Model: ZCK-192S BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Kegco has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice KEGCO 8520 Miralani Dr., San Diego, CA 92126 www.kegco.com...
Important Safety Information Improper handling can cause serious damage to the Kegco kegerator and/or injury to the user. This kegerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty.
Page 3
The instruction manual should be read before use. This owner’s manual is provided for reference use only. Specifications may change without prior notice. Refer to the product label on the back of your kegerator for the latest technical information. www.kegco.com 1.888.980.4810...
Parts Identification Front View Tip: Gather the model and serial number from the product label and write them down before installing the kegerator Back View www.kegco.com 1.888.980.4810...
Before you move your kegerator into its final location, it is important to make sure you have the proper electrical connection: A standard electrical supply (115V, 60Hz), properly grounded in accor- dance with the National Electrical Code and local codes and ordinances, is required. www.kegco.com 1.888.980.4810...
2. To adjust the height of the kegerator, simply turn the feet (Right = dispense kit components Lower / Left = Raise) may be included with your kegerator depending on the IMPORTANT: Kegerator should be level before the installation type purchased. www.kegco.com 1.888.980.4810...
□ Attach the CO2 regulator (L) to the CO2 tank (9) by screwing the regulator nut onto the CO2 tank (9) valve and tightening with an adjustable wrench. www.kegco.com 1.888.980.4810...
Page 8
Place the CO2 tank inside the kegerator for a cleaner look. □ Attach the tank through the retainer and secure it with the provided bolt and nut. □ Position the tank so you can read the gauge and have easy access to the shut-off valve. www.kegco.com 1.888.980.4810...
Page 9
(18) by turning it clockwise. □ Allow several minutes for the keg to pressurize. The gauge (20) may show a drop in pressure while this happens. Adjust as needed. □ Plug the kegerator/beverage cooler into a 120V, 60Hz, 15 Amp grounded outlet www.kegco.com 1.888.980.4810...
Press the “°F/°C” button to change the display from °F to °C The unit will run automatically once plugged in. Unplug the unit to turn it off. Caution: If you powered off the unit, please wait at least 5 minutes before powering it back on. www.kegco.com 1.888.980.4810...
A few minutes spent cleaning on a regular basis will add life to your system and improve the quality of your draft beer! www.kegco.com 1.888.980.4810...
The door is being opened often. The kegerator turns on opened. and off frequently. The door is not completely Make sure the door is completely closed. closed. The door gasket is not sealing Make sure the door gasket is properly sealing. properly. www.kegco.com 1.888.980.4810...
Page 13
The door gasket is not installed Make sure the door gasket is properly installed. correctly. This kegerator will not fit oversized kegs. Please The keg used is too large. check the specifications on the next page for proper keg loading. www.kegco.com 1.888.980.4810...
WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.
Need help?
Do you have a question about the ZCK-192S and is the answer not in the manual?
Questions and answers
How to open the door after receiving?
To open the door on a Kegco ZCK-192S after receiving it, pull the door handle and open it normally. Ensure the door is closed tightly after use and avoid opening it frequently or for long periods to maintain the desired temperature.
This answer is automatically generated