This product is not a toy. Keep it out of reach of children. Maintain labels and nameplates on the unit. These carry important safety information. If unreadable or missing, contact Kincrome Tools for a replacement. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
This tester is designed in strict accordance with the IEC/EN61010-1 safety standard, meeting the requirements for double insulation and over voltage protection at CAT III 600V and pollution degree 2. The Kincrome KP8502 tester is specifically designed for 12V and 24V lead-acid starting batteries. It operates within a voltage range of DC 9V to 36V.
Digital Battery Tester 12V & 24V KP8502 5-1-4. Press to select CCA TYPE which is displayed Operation on the battery rating label, and press <ENTER> to continue. The tester operates using power from the vehicle battery 5-1-5. Press to select CCA RATED which is under test.
Digital Battery Tester 12V & 24V KP8502 Reading below 9.6V ( for 24V system, reading below 16V ) All Electric System 13.4~14.8 Normal means cranking is abnormal. Please check associated parts On (Depress , such as connections, wires, starter and battery’s terminal 13.2~13.4...
Kincrome Express Warranty, you can, at your cost, send the product to the above address for repair or replacement. Your rights under a Kincrome Express Warranty are in addition to any other rights you have under the Australian Consumer Law or other applicable laws.
Need help?
Do you have a question about the KP8502 and is the answer not in the manual?
Questions and answers