ROOMS TO GO 3736-1 Assembly Instructions

Manufactured by GLOB for Rooms To Go
STEP CODE
Tipping Restraint
1 A
PLEASE NOTE:
To avoid the possibility of the furniture tipping and injury,
the Anti-tip hardware must be installed.
(The screwdriver is not included.)
STEP 1 : To attach Dresser to wall with anti-tipping kit
Completed
Hardware Pack Location (s) :
Dresser , SKU# 32137362
Version#1-03/15/2023 created
ASSEMBLY INSTRUCTIONS
GLOB
HARDWARE
A
WALL
3736-1 DRESSER
1.We recommended that you should assemble
Q'TY
this product with assistance of another person;
this will make assembly easier and will eliminate
damage to the product or injury to persons during
1set
assembly.
2.Please do not over tighten screws or bolts until
assembly is complete.
3.Please put all parts on a non-abrasive floor
before assembly, and follow assembly steps to
assemble your newly purchased product correctly
and efficiently.
(The screwdriver is not included.)
SKU# 32137362
WALL
Page#1