Table of Contents
Advertisement
Installation Planning Guide
Finisher
DocuTech 65/DocuPrint 65
The Finisher consists of the Top Tray and the Stacker Tray, as shown below
in Figure 3-6.
Figure 3-6. Finisher components
Stapler is
within the
finisher
Top Tray
The Top Tray holds sheets that are purged from the system or up to 250 prints
on small paper that cannot be stapled. It cannot be selected as an output
destination.
Stacker Tray
The Stacker Tray is the output tray for all other jobs. The Stacker Tray has two
staplers, each with a 5000-staple cartridge, that can staple sheets ranging in
size from 6.7 x 8 inch (170 x 203 mm) to 12 x 18 inch (305 x 457 mm) of 16 to
110 lb (60 to 200 gsm) stock. Up to a maximum of 50 sheets of 20 lb (80 gsm)
can be stapled.
Product overview
Top Tray
Finisher
button
Press the Finisher Button
to unload the Stacker Tray
during a print run
3-7
Advertisement
Table of Contents
