Micr Printing On The Docuprint 96, 4635, And 180 Micr Ips Printers; Micr Applications - Xerox DocuPrint 180 Solution Manual

INCORPORATING XEROX VALUE-ADDED FEATURES

MICR applications

MICR printing on the DocuPrint 96, 4635, and 180 MICR IPS printers

5-12
You may print documents that include MICR fonts on the DocuPrint
96, 4635, and 180 MICR IPS printers. Xerox provides the IPS MICR
font kit which includes the E13B and the CMC-7 MICR fonts, MICR
diagnostic forms and installation instructions. These fonts are loaded
into your 300 dpi font library and used for all MICR applications
printed on the DocuPrint 96, 4635, and 180 MICR IPS printers.
While other printers may also print MICR applications, they do not
guarantee their printing and product quality. Xerox stands behind the
performance of Xerox MICR laser printers and the Xerox benchmark
MICR inks. We will assist our customer in investigating and resolving
bank-reported MICR performance or reject rate problems. If we are
unable to resolve the issues, we will reimburse the customer for fees
they are required to pay to their bank for excessive rejects of checks
printed after Xerox was notified of the problem, and where it is
verified by Xerox that Xerox MICR materials or printer-related check
defects are the cause of the imposition of the fees.
Use of a non-Xerox E13B and CMC-7 MICR font is not supported and
will invalidate the Xerox Check Performance Guarantee. Any Xerox
cost incurred in this regard may be billed to the customer.
You can print your existing MICR applications that were originally
created for an IBM 3828 MICR printer on the DocuPrint 96, 4635, and
180 MICR IPS printers. This printer accesses the Xerox AFP MICR
fonts to print the MICR characters required for the document. All
other font resources for MICR applications printing must be supplied
at 300 dpi resolution.
DOCUPRINT IPS SOLUTIONS GUIDE