Copying From Memory (Job Recall); Objectives; Reading Activity; Resources Required - Xerox 6204 Study Manual

Xerox 6204 Wide Format Solution

10 Copying from Memory (Job Recall)

After you scan a document, the machine retains the job information
in its memory for a period of time. While the job information is
retained in memory, you can use the Copy from Memory feature to
reprint the most recent job.

Objectives

Upon completion of this module, you will be able to:
•
Make a copy using the Copy from Memory feature.

Reading Activity

Read the following section in the User Guide before setting up and
running Copy from Memory.
3 Copy:

Resources Required

24" x 36" (D/A1) original

Activity

Refer to 3 Copy - Copying from Memory in the User Guide as you
perform the activity.
1. To place a copy job in memory, make a copy of the 24" x 36"
document used earlier, using the following setup:
Reduce/Enlarge: 100%
Media Source: Auto
Media Type: Bond
Original Type: Text/Line
2. Set the copy quantity to 1.
3. Insert the document into the scanner, LEF, and make one copy.
4. Press the Copy from Memory button on the Control Panel.
The [Job Recall] screen will display.
5. Press the Print button on the [Job Recall] screen.
The [Override Settings] screen will display.
6. Press the Print button in the upper, right corner of the [Override
Settings] screen.
The job in memory will reprint.
7. Press Clear All.
25
Copying from Memory
Participant Guide