Activity 1 - Copying A Standard Size Original - Xerox 6204 Study Manual

Participant Guide
Activity 1 – Copying a Standard Size Original
Refer to 3 Copy, Copying Procedure in the User Guide as you
perform the activity.
In this activity you will make a full size copy of a standard 24" x 36"
(D/A1) original. The machine will copy the original on the 36" media
that you loaded in the upper media drawer. Sensors located in the
scanner will detect both the width and the length of the original and
will send this information to the controller. The controller will inform
the printer when to cut the copy so that its dimensions will be the
same as those of the original.
1. If the [Copy] Menu is not displayed, press the Copy button on
the Control Panel to display it.
2. Touch the [Image Quality] tab. Verify that the Text/Line button
is selected (darkened); if it is not selected, press it to select it.
Do not change the Copy Density, BG. Suppress. (Background
Suppression), or Contrast settings.
3. Touch the Basic Copy tab.
4. Make the following selections on the Basic Copy tab:
Reduce/Enlarge: 100%
Media Source: Auto
Media Type: Bond
5. The default copy quantity is 1 so it is not necessary to enter a
quantity on the numeric keypad.
6. Insert the 24" x 36" document into the scanner in a landscape
orientation (also known as Long Edge Feed or LEF, see Figure
1). It will pre-feed a short distance, pause briefly, then continue.
18
Xerox 6204 Wide Format Solution
Scan
Figure 1
Copy