Xerox 6030 Setup Manual page 12

XEROX WIDE FORMAT 6030/6050 Print System:
Print Server Enablement Feature Key – Enables print and copy mode for
a remote printer.
XEROX WIDE FORMAT Printers and Scan Systems:
Job Accounting Feature Key – Job accounting enables the tracking of
media usage data. The Account Management Tool (AMT), or some other
external accounting tool, is used to assign a User ID, Account ID, and
Printer ID. It then collects and tallies the stored data from the printers.
PostScript Feature Key – This enables the interpretation of Adobe Post
Script 3, PDF 1.4, 1.5, and 1.6 for the YKE/YKE-N controller, and PDF 1.3
for all other controllers.
Disk Image Overwrite Feature Key – Enables the security options for
overwriting image data on the hard drive.
OS Enablement Feature Key – Enables the YKE/YKE-N controller to
print, copy, and scan.
AutoCAD – Supports the DWG, DWF, and DXF file formats generated by
Autodesk applications. Enables printing of AutoDesk DWF format files.
Requires an Advanced Network Hardware Address and a Machine ID.
XEROX WIDE FORMAT 6204 Print System:
6204 5D– Use to enable 5 D size prints per minute printing speed.
Requires an Advanced Network Hardware Address and a Machine ID.
XEROX WIDE FORMAT 510 Print System:
Drawer 2 Feature Key– Use to enable usage of the second roll feed
drawer for operation.
Drawer 3 Feature Key– Use to enable usage of the third roll feed drawer
for operation.
7D Feature Key– Use to enable operational speed of 7 D size prints per
minute.
10D Feature Key– Use to enable operational speed of 10 D size prints per
minute.
PRINT ENGINE CONFIGURATION
This section shows the FreeFlow Accxes firmware version, the IOT hardware
address, the paper roll drawers that are present, the language, if a finisher is
attached, resolution (DPI), power saver minutes, and media usage.
INSTALLED MEDIA
This section lists the size and type of media installed in the printer.
SCANNER CONFIGURATION
FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide
8