Setting Up A Novell Printer In Windows (2000, 2000 Pro, Xp And 2003) - Xerox DocuColor 252 Quick Connect Manual

14

Setting Up a Novell Printer in Windows (2000, 2000 Pro, XP and 2003)

Browse to the folder to which you copied the
7.
select it.
Click to assign the
8. Open
printer.
Click to add the new printer to the printer list.
9. Add
You need a Novell system administrator to setup a Novell printer, client, or
queues printing.
Important: Novell printing is only available at sites that have a Novell Printer
Server installed and configured for use with the Spire CX260. A Novell System
Administrator is required in order to ensure that the Novell Printer Server is
installed and configured properly.
The following items must be installed and configured in Windows before
you begin:
•
Creo Print Driver
•
IPX/SPX/NetBios-compatible transport protocol
•
Client Service for Netware® services
™
•
Novell Client workstation software installed on the Spire CX260
(refer to Step 3 of this guide for more details).
From the menu, select
1. Start
Double-click
2. Add printer
Follow the wizard and select
3.
Browse the
4. NetWare or Compatible Network
Novell Printer Server.
Select the printer that you want to print to and then configure it with
5.
the Xerox DocuColor 242/252/260 printer/copier.
Continue to follow the steps through the wizard and then click
6.
CX260_V2.PPD
file to the selected network
CX260_V2.PPD
Settings > Printers
.
printer.
Network
for the Spire CX260 or a
Quick Connect Guide
file and
.
Finish
.