Step 5: Printing from a Macintosh or Windows Computer
Setting Up a Printer on a Macintosh Computer (Mac OS 9.0 or later)
Setting Up a Printer on a Macintosh Computer (Mac OS X - 10.4 or later)—IP, SMB, or
Before setting up one of the Spire CX260 network printers, you need to
first install the CX260 PPD. To install the
AppleShare® software to your Spire CX260, log in as guest and from the
Utilities folder, copy the
in the Mac® OS® System Folder.
To set up a printer on your Macintosh computer:
and browse the network to your Spire CX260.
Select one of the Spire CX260network printers, for example,
and then click
automatically setup on your Macintosh computer.
Note: Some of the steps in this procedure may be different if you are using a
version older than Mac OS X 10.4.
Before setting up one of the Spire CX260 network printers, you must first
install the CX260 PPD. To install the
AppleShare to your Spire CX260, log in as guest and from the Utilities
folder, copy the
Open the Utilities folder and then double-click the
The Print Browser window appears.
Browse to the CX260 network printer (if you are defining an IP
printer, enter the CX260 IP address or host name, and the exact name
of the printer to which you want to print—for example,
to the Printer Descriptions folder
to your hard disk.
, connect via the
, connect via